Key takeaways
- Compare 10 table saw push sticks, push blocks and featherboards by pack size, mounting style and what each listing says it fits, plus a buying checklist.
For most home shops, the safest starting point is two featherboards plus at least one push stick or push block, and the POWERTEC kits below cover that combination in several pack sizes. If you only want the featherboard half, the BOW EVA and Hedgehog Spiral models take a different approach to clamping. Everything here is based on listing titles, because nobody on the team has handled this hardware. Measure your miter slot before ordering anything.
Quick picks
Our top picks
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
- Biggest bundle: POWERTEC 5PK (71818), which lists a tandem featherboard with push sticks and push blocks.
- Simple starter kit: POWERTEC Safety Kit (71551V), three pieces covering a push block, an L-shape stick and featherboards.
- For T-track owners: POWERTEC Universal Tandem (71393), which says T-track bolts are included.
- One-knob miter slot option: The Hedgehog Spiral Featherboard.
- Replaceable feathers: BOW Products EVA Featherboard.
Comparison table
| Model | Key point from title | Best for |
|---|---|---|
| POWERTEC 71555V (2PK) | Tandem featherboard plus L-shaped stick | Basic table saw setup |
| POWERTEC 71555 (2PK) | Tandem featherboard plus L-push stick | Same use, older listing |
| POWERTEC 71818 (5PK) | Featherboard, push sticks, push blocks | Full drawer refill |
| POWERTEC 71551V (3Pcs) | Push block, L stick, featherboards | First safety kit |
| POWERTEC 71393 (2Pk) | Universal tandem, T-track bolts included | T-track fences |
| POWERTEC 71554 (2-piece) | Featherboards plus magnetic push stick | Steel-top convenience |
| POWERTEC 72096 (1PK) | Flex and miter lock, two push sticks | One adjustable board |
| FUYUNXIN (Pack of 2) | T-slot and miter slot featherboard | Budget-minded buyers |
| BOW Products EVA | AnchorPRO miter bar, replaceable feathers | Non-marring contact |
| Hedgehog Spiral | Single knob, spiral shape | Fast one-handed setup |
The 10 listings, one by one
POWERTEC 71555V Tandem Featherboard and L-Shaped Push Stick (2PK)
The title names table saws, router tables, band saws, shapers, planers and jointers as compatible machines, and promises reduced kickback. It is a two-pack pairing a tandem featherboard with an L-shaped pusher. The “V” suffix looks like a revision of the 71555 below, so treat the two as near-duplicates and check which one the seller ships.
Pros
- Featherboard and pusher in a single small pack.
- Wide list of compatible machines.
Cons
- Only one pusher style, so no separate push block.
- Mount details are not in the title.
Who it’s for: A first-time buyer who wants the two core items without a big kit.
POWERTEC 71555 Tandem Featherboard and L-Push Stick (2PK)
This listing reads almost word for word like the one above, minus the “V” in the model number. It names table saws, router tables, planers and jointers, and says the pusher reduces kickback. We cannot see from the title whether the parts differ, so confirm the contents on the product page before choosing between them.
Pros
- Same two-piece idea as the 71555V.
- Fits several machine types per the title.
Cons
- Overlaps the 71555V, which can confuse comparison.
- No stated slot width.
Who it’s for: Shoppers who find this version in stock and want the same basic pairing.
POWERTEC 71818 Tandem Featherboard with Push Sticks and Push Blocks (5PK)
The title lists a tandem featherboard plus push sticks and push blocks across table saws, router tables, band saws and jointers. Five pieces means you can keep one pusher at each machine instead of carrying it around. The exact split between sticks, blocks and boards is not spelled out, so read the listing contents.
Pros
- Most pieces of any POWERTEC listing here.
- Covers both stick and block styles.
Cons
- Piece breakdown is unclear from the title.
- More than a one-saw shop may need.
Who it’s for: A shop with a table saw, router table and jointer that wants spares for each.
POWERTEC 71551V Safety Kit (3Pcs)
A three-piece set: a push block, an L-shape push stick and featherboards, aimed at router tables, jointers and band saws as well as table saws per the title. It stands out because it names a push block specifically. That makes it a tidy “one of each” purchase, though three pieces will not equip every machine.
Pros
- One of each pusher style in the title.
- Easy to understand at a glance.
Cons
- Small count if you own several machines.
- Featherboard count not stated.
Who it’s for: Someone buying a first safety kit for a single table saw.
POWERTEC 71393 Universal Tandem Featherboards (2Pk)
Aimed at table saws, router tables, router fences and band saws, this pair says T-track bolts are included. That matters if your fence or router table has T-track, because no hardware shopping is required. There is no pusher in the title, so pair it with a push stick from another listing.
Pros
- T-track bolts listed as included.
- Targets router fences as well as saws.
Cons
- No push stick or block.
- Less useful without a T-track or slot.
Who it’s for: Owners of T-track fences or router tables.
POWERTEC 71554 Universal Featherboard Kit with Deluxe Magnetic Push Stick
Two featherboards plus a magnetic push stick, for table saws, router tables and jointers. The magnet presumably lets the stick cling to a steel surface, but the title does not say where, so look at the product page before assuming it will stick to your saw. It is the only magnetic option in this group.
Pros
- Pair of featherboards plus a pusher.
- Magnetic stick is a rare feature here.
Cons
- Magnet usefulness depends on your shop layout.
- Single push stick only.
Who it’s for: A tidy-minded woodworker who wants the stick parked on a steel surface.
POWERTEC 72096 Universal Featherboard (1PK) with Two Push Sticks
One featherboard with a “Flex and Miter Lock System” and two deluxe push sticks, compatible with table saws, router tables, band saws and jointers. Note that this is a single featherboard, so you would need to buy another if you want two pressing on the stock at once. The title does not explain how the lock works.
Pros
- Includes two push sticks.
- Adjustable-style flex and lock named.
Cons
- Only one featherboard.
- Lock mechanism not described.
Who it’s for: Someone who already owns a featherboard and wants adjustable, extra pushers.
FUYUNXIN Featherboard Safety Table Saw Push Block (Pack of 2)
The wording is muddled: it says “Featherboard Safety Table Saw Push Block” and “Table Fence,” so it is unclear whether you get featherboards, push blocks or both. It does mention T-slots and miter slots on table saws, router tables and band saws. Open the product images and description before buying, and treat it as a value-leaning unknown.
Pros
- Mentions both T-slots and miter slots.
- Two-piece pack.
Cons
- Ambiguous title about what the pieces are.
- Lesser-known brand.
Who it’s for: A buyer who will confirm the contents first and wants a low-commitment option.
BOW Products EVA Featherboard
This listing mentions an EVA featherboard with an AnchorPRO miter bar, “5X Kickback Resistance,” non-marring contact and replaceable feathers. The miter bar approach means it locks into the slot rather than relying on a loose bolt. Replaceable feathers are the notable long-term feature, since the contact edge is the part that wears.
Pros
- Non-marring EVA contact surface.
- Feathers can be swapped.
Cons
- Single featherboard.
- The “5X” claim has no stated baseline.
Who it’s for: Woodworkers who want a durable, repairable featherboard.
The Hedgehog Spiral Featherboard
The title says it fits miter slots (the listing shows “3/4” with a garbled character, so confirm the exact width), offers one-handed single-knob adjustment, and uses a spiral shape to reduce kickback. It is one featherboard, not a kit. The single knob suggests quick repositioning between cuts, which is the whole selling point.
Pros
- One-handed adjustment per the title.
- Works on table saws, router tables and bandsaws.
Cons
- Slot width text is garbled in the listing.
- No pushers included.
Who it’s for: Anyone who resets a featherboard often and wants less fiddling.
How we picked these
We worked from the product titles in each listing: brand, model number, pack size and the machines and mounting styles they name. We grouped near-duplicate listings and flagged unclear wording rather than guessing. We have not looked at user photos or sizing beyond the title. Nobody on the team used or measured these units. Always read the full listing and your saw’s manual before buying.
What to look for in push sticks and featherboards
Match the mount to your table
Featherboards attach three main ways: a miter bar that slides into your table’s slot, a bolt that rides in a T-track, or a clamp. A featherboard that does not fit your table is just a piece of plastic. Measure the slot width and depth, check whether your fence has T-track, and match that to the listing. If a title says nothing about the slot, ask before buying.
Pushers: stick versus block
A push stick is a narrow, notched tool for pushing narrow stock along the fence. A push block is wider with a handle, designed to hold wider boards flat. Many kits include one of each. If you mostly rip narrow strips, you will want more sticks and spares; if you plane or joint wide boards, blocks matter more.
Material and wear
Plastic and EVA parts are meant to take the abuse so your hands do not. The feather edge on a featherboard and the heel on a push stick are the contact points that wear first, so replaceable parts or cheap multi-packs are worth considering. Retire any pusher with deep nicks or a cracked handle.
Worked example: a three-piece shop kit
Say you own a contractor-style table saw with 3/4-inch slots and mostly rip 4-inch-wide pine. A workable kit is two featherboards (one for the fence side, one for the table), one L-shaped push stick for narrow rips, and one push block for wider boards. That would point you to a bundle like the 71551V plus an extra pair of featherboards, or the 71818 five-pack. Before the first cut, place the featherboards in front of the blade, check that they press lightly, and confirm the board still slides forward.
Mistakes buyers make
Buying on piece count alone is common: five pieces sound better than two, but if three are pushers you may still lack featherboards. Another mistake is ignoring slot width and finding out at home that it does not fit. Placing a featherboard beside or behind the blade instead of in front of it can pinch the wood, so follow your saw’s manual. Finally, keeping a chewed-up push stick “just in case” defeats the purpose; replace it.
Verdict
For a one-purchase solution, the POWERTEC 71818 five-pack or the 71551V three-piece kit cover pushers and featherboards. If you already have pushers and want a better featherboard, the BOW EVA or Hedgehog Spiral models are the specialist choices, subject to checking slot fit. Confirm every mount against your own table.
Related guides
- Table Saw Blades For Ripping Hardwood
- Jobsite Table Saws For Contractors
- Cabinet Table Saw For Home Shop
Frequently asked questions
Do you need both a push stick and a featherboard?
They do different jobs. A featherboard holds the workpiece against the fence or table so it cannot wander, while a push stick or push block keeps your hand away from the blade as the cut finishes. Most kits on this list bundle both, which is usually the easiest way to cover the basics in one purchase.
Will a featherboard fit a standard table saw miter slot?
Check the slot width and the mounting method in the listing. Several models here mention miter slots, one mentions T-track bolts, and others mention a miter bar. Measure your slot, compare it with the listing, and ask the seller if the fit is not stated. Do not force a part that does not slide freely.
Where should a featherboard sit relative to the blade?
Follow your saw’s manual first. As a general rule, featherboards press the stock before the blade, not alongside the cut-off piece, because pressure beside or behind the blade can pinch the wood. Lock it down, check that the board still slides forward with moderate pressure, and recheck whenever you change the fence setting.
Are plastic push sticks safe to use near the blade?
They are designed to be sacrificed rather than your fingers, and many people prefer them because a blade contact usually damages the stick instead of anything harder. Inspect them for nicks and cracks, retire any that are chewed up, and keep a spare in the drawer so you never reach for a bare hand.
Can one featherboard work on a router table and band saw too?
Several listings here say they fit router tables, band saws, jointers or planers as well as table saws. Treat that as a starting point and check how each machine’s table or fence accepts the mount. The width of the slot or track on the second machine matters just as much as on the table saw.
Write Your Review
No reviews yet. Be the first to share your experience!