Key takeaways
- Compare the best woodworking sawmills for turning logs into lumber at home. Five portable band sawmills with gas engines, long tracks, and wide boards.
A fallen oak or storm-damaged maple can become shelves, benches, and table tops, but only if you can cut it into boards first. That is the job of the best woodworking sawmills: machines that turn whole logs into lumber where the tree fell.
This guide covers portable band sawmills only: standalone machines with their own gas engine and track, unlike chainsaw mills, which are frames that clamp onto a chainsaw. A band sawmill cuts a thinner kerf, so less of each log becomes sawdust.
The five mills below are all sold on Amazon: four from MechMaxx, with the widest range of band sawmills listed there, and one from BILT HARD, a competing budget brand. The big dealer brands, Wood-Mizer, Norwood, Woodland Mills, and Frontier, sell mostly direct, so they do not appear here.
As an Amazon Associate, I earn from qualifying purchases.
How to Choose a Portable Band Sawmill
Four numbers decide whether a mill fits your logs.
Maximum log diameter. This is the largest log that fits between the posts of the saw head. Measure the butt ends of your logs, add a few inches for bark, and buy that much capacity.
Maximum board width. Board width is always smaller than log diameter, because the blade guides and head frame eat into the working width. A 32-inch mill may only cut a 26-inch board, so check board width for wide live-edge slabs.
Track length and cutting length. Track length is not the longest log you can cut: the saw head needs room at both ends, so cutting length is always shorter. A 20-foot track may only cut a 16-foot log, so if you mill standard 16-foot sawlogs, you need a 20-foot track or an extension.
Engine size and starting. Most mills in this class run gas engines of about 8 to 25 horsepower. A smaller engine cuts softwood and small logs fine, but you will feed it slowly through wide hardwood, and electric start is worth having on a 15-horsepower engine.
Also think about setup: a band sawmill needs a flat, level spot, or boards will taper from end to end. Plan a way to get logs onto the bed, and a full day for assembly: these machines arrive in heavy crates with often thin instructions, so bring a second pair of hands. Keep spare blades on hand, since a blade dulls quickly on dirty bark, knots, and grit.
Comparison Table
| Sawmill | Max Log Diameter | Max Board Width | Max Board Thickness | Engine | Track Length |
|---|---|---|---|---|---|
| MechMaxx SM-32 | 32 in. | 26.5 in. | 7 in. | 15 HP, 420cc, electric start | 20 ft |
| MechMaxx SM-22 | 22 in. | 18 in. | 6 in. | 8.1 HP, 274cc, pull start | 13 ft |
| MechMaxx SM-26 | 26 in. | 20 in. | 7 in. | 15 HP, 420cc, electric start | 20 ft |
| MechMaxx SM-36 MAX | 36 in. | 36 in. | 7 in. | 25 HP, 750cc V-twin | 26.4 ft with extension |
| BILT HARD 32 in. | 32 in. | 28.7 in. | 7 in. | 15 HP, 420cc, electric start | 153.6 in. total |
MechMaxx SM-32 Portable Sawmill
The SM-32 is the middle of the MechMaxx range and the pick most buyers should start with. It handles logs up to 32 inches and cuts boards up to 26.5 inches wide. The 20-foot track cuts 16.3 feet, so it takes a standard 16-foot sawlog without an extension, and the 15-horsepower electric-start engine handles wide hardwood. Five blades and a log hook are included.
- Specs:
- Max log diameter: 32 in.
- Max board width: 26.5 in.
- Max board thickness: 7 in.
- Engine: 15 HP, 420cc Zonsen gas engine with electric start
- Track length: 20 ft, with a listed cutting length of 16.3 ft
- Included: 5 blades and a log hook
MechMaxx SM-22 Portable Sawmill
The SM-22 is the smallest and lightest MechMaxx, for new sawyers with modest logs. It takes logs up to 22 inches and cuts boards up to 18 inches wide, enough for shelving, furniture stock, and beams. The trade-off is length: the 13-foot track cuts only 10.4 feet, so long sawlogs need an extension. The engine is pull start only, workable at this size.
- Specs:
- Max log diameter: 22 in.
- Max board width: 18 in.
- Max board thickness: 6 in.
- Engine: 8.1 HP, 274cc Ducar gas engine with pull start
- Track length: 13 ft, with a listed cutting length of 10.4 ft
- Best for: first-time sawyers and small logs
MechMaxx SM-26 Portable Sawmill
The SM-26 puts the SM-32’s 15-horsepower electric-start engine into a smaller frame, so you get full-size power without full-size width. It takes logs up to 26 inches and cuts boards up to 20 inches wide, suiting trees that top out in the mid-20s. This is the 20-foot version with ten blades included. One caution: the 20-foot SM-26 appears under more than one listing, and they disagree on cutting length (16.4 feet versus 10 feet), so confirm in writing if you need 16-foot logs.
- Specs:
- Max log diameter: 26 in.
- Max board width: 20 in.
- Max board thickness: 7 in.
- Engine: 15 HP, 420cc Zonsen gas engine with electric start
- Track length: 20 ft
- Included: 10 blades
MechMaxx SM-36 MAX Portable Sawmill
The SM-36 MAX is the biggest mill in this guide, built for wide slabs and large hardwood logs. It takes logs up to 36 inches and cuts boards up to 36 inches wide. The 25-horsepower V-twin has the torque for wide hardwood, and the track runs 26.4 feet with the extension, cutting 22.6 feet. The crate is the biggest and heaviest in the range, and you need a tractor or log arch to load its logs. If your trees are under 30 inches, the SM-32 does nearly the same job with less weight.
- Specs:
- Max log diameter: 36 in.
- Max board width: 36 in.
- Max board thickness: 7 in.
- Engine: 25 HP, 750cc Zonsen V-twin gas engine
- Track length: 26.4 ft with the included 6.4 ft extension
- Listed cutting length: 22.6 ft
- Included: 10 blades, a log hook, and a 6.4 ft track extension
BILT HARD 32 Inch Portable Sawmill
The BILT HARD 32-inch mill is the non-MechMaxx option here, and the closest direct rival to the SM-32. It runs a 15-horsepower, 420cc Ducar gas engine with electric start, takes logs up to 32 inches, and cuts boards up to 28.7 inches wide, wider than the SM-32. The track totals 153.6 inches, about 12.8 feet, and the longest log it takes is 123 inches, just over 10 feet, so it suits shorter logs, while the SM-32’s 20-foot track suits full-length sawlogs.
- Specs:
- Max log diameter: 32 in.
- Max board width: 28.7 in.
- Max board thickness: 7 in.
- Engine: 15 HP, 420cc Ducar gas engine with electric start
- Track length: 153.6 in. total
- Max log length: 123 in.
- Blade: high-speed steel band blade
Which Woodworking Sawmill Should You Pick
If you are new to milling and your logs are small, the MechMaxx SM-22 is the easiest way in, with the least assembly and the lightest head. If your logs run to the mid-20s and you want electric start, the SM-26 gives you the big engine in a smaller frame, but confirm the cutting length first. For most buyers, the SM-32 is the right answer: 32-inch logs, 26.5-inch boards, a 20-foot track for 16-foot sawlogs, and electric start, with five blades and a log hook. Choose the BILT HARD 32-inch mill if your logs are 10 feet or shorter and you want the wider board, and the SM-36 MAX only if you regularly slab logs over 30 inches.
Frequently Asked Questions
What is the difference between a band sawmill and a chainsaw mill?
A band sawmill is a standalone machine with its own engine, band blade, and track, and the saw head travels along the track to cut boards from a log on the bed. A chainsaw mill is a frame that clamps onto a chainsaw. Band sawmills cut a thinner kerf, so less wood becomes sawdust. Chainsaw mills are lighter and cheaper, but slower and more wasteful.
How long does it take to assemble a portable band sawmill?
Plan on a full day, with a second person and a way to unload the crate. The instructions are often thin, so the maker’s assembly videos help, and the track must be levelled carefully before the first cut. Check the bolts again after the first few cuts.
What size logs can a portable band sawmill handle?
The mills in this guide range from 22 to 36 inches in log diameter, and from about 10 feet to over 22 feet in cutting length. Measure the logs you have, and buy a mill that covers them with room to spare. Board width is always smaller than log diameter.
Do I need spare blades for a band sawmill?
Yes. A band blade dulls quickly on dirty bark, knots, and grit, and a dull blade wanders and leaves a rough surface. Keep several spares on hand, keep the blade lubricated, and change it as soon as cuts drift. Some listings include five or ten blades.
Conclusion
The best woodworking sawmills turn logs that would otherwise be firewood into lumber you can build with, with a thin kerf and straight, repeatable cuts. Start with your biggest logs and longest boards, and favour electric start and a long track. The SM-32 fits most buyers, the SM-22 fits beginners, the SM-26 fits those who want big-engine power in a smaller frame, the SM-36 MAX fits wide slabs, and the BILT HARD 32-inch mill fits shorter logs with a wider board.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!