Key takeaways
- Compare five drill press tables for woodworking, from laminated MDF worktops to a Micro-Dot kit, and find the fence, T-tracks, and size your shop needs.
As an Amazon Associate, I earn from qualifying purchases.
The small metal table that ships with most drill presses is fine for one hole in a small block, and not much else. The moment you need a row of evenly spaced holes in a shelf side or a mortise in a long rail, the stock table runs out of room, the workpiece tips, and accuracy goes with it. A drill press table fixes that: a flat auxiliary surface that clamps onto the factory table, giving you a bigger platform, a fence for repeatable positioning, and tracks for hold-down clamps. This guide compares five MDF tables with fences, differing in size, fence design, tracks, and included accessories.
How to Choose a Drill Press Table
Start with size. A table around 24 inches long and 12 inches deep suits most drill presses, and four of the five tables below share that size. It supports long boards without tipping. For a 12-inch or larger drill press, look for a table made for that class of machine.
Next, look at the fence and its tracks. It should sit square, lock firmly, and slide smoothly, so you can set the distance from the bit once and drill a whole row without measuring each one. A stop block riding along the fence adds repeatability in the other direction. Two parallel T-tracks running front to back let you position hold-down clamps wherever the workpiece needs them; bolted-in metal tracks resist pulling out better than routed slots. MDF fences are fine and easy to modify; extruded aluminum stays straighter over time.
Bare MDF absorbs moisture and swells, so every table worth buying is coated: melamine on most, micro-dot laminate on the premium kit below. The coating keeps glue off, lets workpieces slide, and keeps the table flat. At 7/8 inch to 1 inch thick, a table absorbs vibration and resists flexing under clamp pressure, so holes come out cleaner.
Finally, check what comes in the box. Some tables include hold-down clamps and a replaceable throat plate; others sell the clamps separately. A throat plate, the removable insert around the bit, protects the surface and lets you drill clean through a workpiece, and it accepts a sanding drum, turning the table into a small edge-sanding station.
Comparison Table
| Table | Size | Material | Fence | T-Tracks | Weight |
|---|---|---|---|---|---|
| MLCS 9765 | 24 x 12 in | 7/8-in MDF, melamine | Included | 2 | 11 lbs |
| Peachtree PW1014 | 24 x 15 in | MDF, laminate | Aluminum | Included | 8 lbs |
| MLCS 2326 | 24 x 12 in | 7/8-in MDF, melamine | Included, with stop block | Included | 12 lbs |
| Woodpeckers WPDPPACK2 | 23 x 16 in | 1-in MDF, Micro-Dot laminate | Included | 2 double-wide | 17 lbs |
| Woodstock D4033 | 23.7 x 12 in | Melamine-coated MDF | 3-in MDF, with stop block | 2 T-slots | 10.5 lbs |
1. MLCS 9765 MDF/Melamine Drill Press Table
The MLCS 9765 gets the fundamentals right: a 24 by 12-inch top of 7/8-inch MDF that damps vibration, a melamine cover that seals out moisture, and two T-tracks anchoring the fence and two included hold-down clamps. The throat plate is wide enough for large bits and most sanding drums. It clamps onto most drill press tables, and MLCS backs it with a 3-year warranty, the longest in this group.
- Specs:
- Table size: 24 x 12 inches
- Material: 7/8-inch MDF with melamine cover
- T-tracks: 2
- Fence: included, with 2 hold-down clamps
- Throat plate: large, replaceable
- Weight: 11 lbs
- Warranty: 3 years
2. Peachtree Woodworking PW1014 Basic Drill Press Table
The Peachtree PW1014 is the widest table here at 15 inches deep, useful when drilling near the edge of a wide panel or supporting an overhanging board. Top and bottom are both laminated, protecting the MDF core from moisture on both faces and keeping the table flat, and even the throat plate is laminated, so the surface wipes clean.
The hardware sets it apart: an extruded aluminum fence that stays straight, and two aluminum hold-down inserts where other tables in this range use plastic. The fence and parts come pre-drilled for quick installation, and Peachtree sells matching parts, so upgrading later is easy.
- Specs:
- Table size: 24 x 15 x 1.4 inches
- Material: MDF, laminated top and bottom
- Fence: aluminum, pre-drilled
- Hold-downs: 2 aluminum hold-down inserts included
- Throat plate: large, laminated
- Weight: 8 lbs
3. MLCS 2326 MDF Drill Press Table
The MLCS 2326 shares the 9765’s 24 by 12-inch footprint and 7/8-inch melamine-covered MDF build, but its fence carries a stop block. Set the fence for the distance from the bit and the stop block for the position along the fence, then drill a row of identical holes without remeasuring. The fence and stop block are melamine-covered like the table, so they clean up easily. Note the hold-down clamps are not included, so budget for a pair if you do not already own T-track clamps.
- Specs:
- Table size: 24 x 12 x 4 inches
- Material: 7/8-inch MDF with melamine cover
- Fence: included, with stop block mounted on the fence
- T-tracks: included, with removable insert
- Hold-down clamps: sold separately
- Weight: 12 lbs
4. Woodpeckers WPDPPACK2 Drill Press Table Kit
The Woodpeckers WPDPPACK2 is the complete kit here, built for 12-inch or larger drill presses. The 23 by 16-inch top is 1-inch MDF covered in Micro-Dot laminate, a surface patterned with small circular pockets that cuts friction while keeping the workpiece stable. It is the largest surface here, and at 17 pounds also the heaviest, which helps it stay put. Two double-wide T-tracks are bolted in rather than routed, so they cannot pull out under clamping pressure, and they carry laser-engraved scales. The kit includes knuckle hold-down clamps, a fence, and stops, so there is nothing else to buy.
- Specs:
- Table size: 23 x 16 x 1 inches
- Material: 1-inch MDF with Micro-Dot laminate
- T-tracks: 2 double-wide, bolted in, with laser-engraved scales
- Fence: included, with laser-engraved scales
- Hold-downs: knuckle hold-down clamps included
- Weight: 17 lbs
5. Woodstock D4033 Drill Press Table
The Woodstock D4033 is the budget pick, for woodworkers who want a capable table without paying for extras. The 23.7 by 12-inch top is melamine-coated MDF, and the package includes a 3-inch-high MDF fence with a stop block, a throat plate, and two universal clamps that attach it to a range of drill press tables. Two wooden T-slots run across the surface, and the tall fence gives good registration for boards standing on edge. Woodstock backs it with a 1-year warranty. The one gap is top hold-down clamps, so add a pair if you do not own some.
- Specs:
- Table size: 23.7 x 12 x 4 inches
- Material: melamine-coated MDF
- Fence: 3-inch MDF fence with stop block
- T-slots: 2 wooden T-slots
- Throat plate: included
- Mounting: 2 universal table clamps included
- Weight: 10.5 lbs
- Warranty: 1 year
Which Drill Press Table Should You Pick
For the best all-around table, start with the MLCS 9765: standard 24 by 12-inch size, two T-tracks, a fence, two hold-down clamps, a large throat plate, and the longest warranty in the group. Choose the Peachtree PW1014 for the widest surface and the best hardware: 15-inch depth with an aluminum fence and hold-downs. Choose the MLCS 2326 if repeatable hole patterns are your main job, since its fence-mounted stop block makes rows of identical holes fast and accurate. Choose the Woodpeckers WPDPPACK2 for a 12-inch or larger drill press and a complete premium kit with engraved scales and included clamps. Choose the Woodstock D4033 if budget is the deciding factor, since it covers the essentials at the lowest cost in this group.
FAQ
Will a drill press table fit my drill press?
Most clamp onto factory tables from underneath and fit a wide range of machines. Measure your factory table and compare it with the mounting hardware before ordering; if the clamp spacing does not match, some tables can be fitted by drilling new mounting holes.
What is a throat plate on a drill press table?
A throat plate is a removable insert in the center of the table, under the bit. It supports the workpiece so the exit side of the hole stays clean, and it protects the table surface. Most are wide enough to accept a sanding drum, letting the table serve as a small drum-sanding station.
Do I need a fence on a drill press table?
A fence is not strictly required, but it is what makes a drill press table useful for repeatable work. Set it once and every hole sits the same distance from the edge of the board. A stop block adds repeatability along the board’s length, so a row of shelf-pin holes comes out evenly spaced without measuring each one.
Is MDF strong enough for a drill press table?
Yes. Tables of 7/8-inch or 1-inch MDF are rigid, absorb vibration, and stay flat when coated with melamine or laminate. The coating seals the MDF against moisture and gives workpieces a smooth surface to slide on. Keep the table dry and wipe off glue promptly, and it will last for years in a home shop.
Conclusion
A drill press table is one of the cheapest ways to make a drill press far more useful: a bigger surface, a square fence, and hold-down clamps turn one-hole-at-a-time drilling into accurate, repeatable work. Pick the MLCS 9765 for the best all-around value, the Peachtree PW1014 for the widest top and aluminum hardware, the MLCS 2326 for stop-block repeatability, the Woodpeckers WPDPPACK2 for a complete premium kit, or the Woodstock D4033 for a solid table on a tight budget.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!