Key takeaways
- Compare six outfeed tables and roller stands for table saws by height range, load rating and fit, from the Rockler Rock-Steady to SawStop and VEVOR.
The Rockler Rock-Steady Folding Outfeed Kit is the best overall pick here if you own a cabinet-style saw and want a real, level surface behind the blade: it is a steel folding frame with adjustable legs that you top with your own panel, so you decide the size. An outfeed table, in this context, is any support behind a table saw that catches long boards and sheet goods as they leave the blade, which keeps the stock flat and your hands out of trouble. Roller stands and folding conveyor tables cover portable and small-shop needs, and the SawStop folding table is a saw-specific option for owners of that brand.
Quick List
- BORA Adjustable Conveyor Roller Stand – best for a compact, adjustable roller that moves between machines
- SawStop TSA-FOT Folding Outfeed Table – best for owners of compatible SawStop cabinet saws
- 660 lb Foldable Roller Conveyor Support Stand – best for a simple, heavy-rated folding roller table
- Rockler Rock-Steady Folding Outfeed Kit – best overall for a true flat table in a fixed shop
- 660 lb Double-Row Stainless Roller Stand – best for supporting wide panels on two rows of rollers
- VEVOR 4-in-1 Roller Stand – best for tall saws and multi-use shop duty
Which One Is Right for You?
| If you… | Choose |
|---|---|
| want a permanent-feeling flat surface behind a cabinet saw | Rockler Rock-Steady Folding Kit |
| own a SawStop cabinet saw listed as compatible | SawStop TSA-FOT |
| work in a tall setup and need to raise the support to 50 inches | VEVOR 4-in-1 Roller Stand |
| need to catch wide panels and sheet goods with extra roller coverage | 660 lb Double-Row Stainless Roller Stand |
| move between a shop and a driveway or jobsite | 660 lb Foldable Roller Conveyor Stand |
| want a single adjustable roller stand to carry long boards | BORA Adjustable Conveyor Roller Stand |
If your shop has floor space, a true table is more stable than any roller. If you work in a garage where everything has to fold away, a roller stand or a folding conveyor is the practical route. Either way, the height must match your saw table within a fraction of an inch.
All 6 Picks in Detail
1. BORA Adjustable Conveyor Roller Stand – Best Compact Roller Support
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
BORA’s stand is an adjustable, expandable conveyor roller stand marketed for table saw outfeed extension. It is a single roller support that you place behind the saw, set to the table height, and use to catch boards as they exit the blade. It is aimed at a woodworker who wants help with long rips but does not have room for a permanent table, and who may also use the stand at a miter saw or planer.
A single adjustable roller is a sensible first step into outfeed support. Place it directly behind the saw, line the roller up with the table surface, and the board will travel across it instead of dropping at the end of the cut. Because it is free-standing, you can pull it across the shop for a long board at the miter saw or planer too. The main limitation is sideways coverage: a wide panel can drift off a single roller, so you may want a second stand or a helper for full sheets.
The listing name does not state the load rating, roller length or height range, so confirm those on the product page before buying, especially if you work with heavy sheet goods.
- Adjustable, expandable roller design
- Intended for table saw outfeed support
- Folds or collapses for storage: confirm on the listing
- Height range: confirm on the listing
- Load rating: confirm on the listing
Pros
- Compact enough for a small shop
- Can serve other machines
Cons
- Key capacity numbers are not in the listing name
- One roller offers less sideways support than a table
Compared with the double-row stand, the BORA is the lighter, simpler support, but it covers less width.
2. SawStop TSA-FOT Folding Outfeed Table – Best for Compatible SawStop Saws
The TSA-FOT is a powder-coated steel folding table made for SawStop cabinet saws. According to the manufacturer, it is compatible with the Industrial Cabinet Saw and the Professional Cabinet Saw with T-Glide fences, and it also works with certain SawStop sliding crosscut tables, but it is not compatible with the Contractor Saw. If you own another brand, this is not the right fit.
For owners of compatible SawStop saws the appeal is fit and finish. The table is engineered around the saw’s rail and fence system, folds down when you need floor space, and keeps long rips supported without improvising brackets. Because SawStop also lists compatibility with its sliding crosscut tables, it can fit into a broader setup of accessories from the same maker. If your saw is not on the compatibility list, skip this model and look at the frame kit or a roller stand instead.
The table includes three roller bars, adjustable feet and a stamped steel support plate. SawStop lists a footprint of about 44-1/4 by 32-1/8 inches with the left extension wing, a net weight of about 37 pounds, and a weight capacity of 250 pounds.
- Powder-coated steel construction
- Footprint about 44-1/4 x 32-1/8 inches with wing
- Three roller bars and adjustable feet
- 250 pound weight capacity per the manufacturer
- Compatible with specific SawStop cabinet saws only
Pros
- Designed to match the saw it mounts to
- Folds flat when not in use
Cons
- Limited to certain SawStop models
- Rollers, not a flat panel, for smaller parts
Compared with the Rockler kit, the SawStop is a purpose-built table for a specific saw, while the Rockler frame suits many more brands.
3. 660 lb Foldable Roller Conveyor Support Stand – Best Simple Folding Stand
This generic stand is listed as a table saw outfeed support rated for 660 pounds, built as a foldable roller conveyor table. A rating like that suggests it is built for panels and long hardwood boards, though the load figure is a manufacturer claim and should be treated as a ceiling rather than a working weight.
A folding conveyor table like this works best as a flexible helper. Open it behind the saw, set the height, rip the board, then fold it flat against the wall. A high stated rating also hints at a sturdy frame, which is useful when you handle full sheets of plywood or long slabs of hardwood. Since the listing gives few specifics, check the product page for the height range, the number of rollers and the frame material before you rely on it for heavy material.
It is a good match for someone who needs more than a single roller but does not want to build a table. The listing name does not give the height range, roller width or construction material, so confirm those details to make sure the support reaches your saw table height.
- Foldable roller conveyor design
- 660 lb rating per the listing
- Intended for table saw outfeed support
- Height range: confirm on the listing
- Roller width and frame material: confirm on the listing
Pros
- High load rating on paper
- Folding design for storage
Cons
- Brand and detailed specifications are limited
- Rollers do not support small parts
Next to the double-row stainless stand, this one offers the same load rating but fewer published details about width.
4. Rockler Rock-Steady Folding Outfeed Kit – Best Overall True Table
The Rock-Steady is a hinged steel frame that mounts to the back of a cabinet-style saw and folds down when not in use. A slotted bracket with interchangeable bushings fits the bolt spacing of many cabinet saws, the legs lock in both the open and closed positions, and crossbars resist sagging. The table surface is not included; you add your own panel, which Rockler says can be roughly 30 to 36 inches wide and 40 to 52 inches long.
The beauty of a frame kit is that the surface is yours. You can cover the top with a laminate-faced panel so glue wipes off, make it deep enough to support an assembly, or cut it narrower to fit between a wall and a dust collector. Rockler lists the leg range and the panel sizes it supports, which makes planning easier. Expect to spend a little time on the build and leveling, and plan to confirm that the bracket fits your saw’s mounting holes before you start.
The telescoping legs span about 22-5/8 to 37-5/8 inches, so you can level the table to the saw. The maximum load is 150 pounds including the table, and the kit is not intended for contractor saws with motors that extend behind the cabinet.
- Hinged steel framework that folds down
- Adjustable legs, about 22-5/8 to 37-5/8 inches
- Panel size: about 30-36 in wide by 40-52 in long (you supply the panel)
- Maximum load about 150 pounds including the table
- Not for contractor saws with rear motors
Pros
- Flat surface supports small parts as well as boards
- Panel size is up to you
Cons
- You must source and finish your own panel
- Lower load rating than the roller stands
Compared with the SawStop table, the Rockler is brand-agnostic but needs a bit more setup.
5. 660 lb Double-Row Stainless Roller Stand – Best for Wide Panels
This stand is described as an adjustable roller stand with a 660 pound rating, a 24 to 36.6 inch height range, double-row stainless steel rollers, and a 39.4 inch long folding conveyor surface. The two rows of rollers present more contact area than a single bar, which helps keep wide panels from tipping off the side.
Two rows of rollers make a difference when the board is wide. A 24-inch-wide shelf panel can ride on both rows without tipping, and the longer conveyor surface carries a heavy board through the whole cut. Stainless steel resists rust if the shop is damp. Keep in mind the height range stops at 36.6 inches, so owners of taller cabinet saws should measure their table before ordering.
The 36.6 inch top of the range is enough for most contractor and jobsite saws, though not for tall cabinet saws at the high end. Because it is a conveyor, it supports long stock best; small parts can fall between the rollers.
- Height range 24 to 36.6 inches per the listing
- Double-row stainless steel rollers
- 39.4 inch long folding conveyor support
- 660 lb rating per the listing
- Intended for table saw outfeed and panels
Pros
- Wider coverage than a single roller
- Stainless rollers resist corrosion
Cons
- Height tops out at 36.6 inches
- Gaps between rollers are not ideal for short stock
Compared with the VEVOR, this stand is lower in maximum height but wider in roller coverage.
6. VEVOR 4-in-1 Roller Stand – Best for Tall Saws and Multi-Use
The VEVOR stand is a heavy-duty, folding roller stand with a 440 pound load capacity and an adjustable height from 33 to 50 inches. The title also notes a rack and polished multi-directional rollers, which suggests it can roll material in more than one direction. At the top of its range it clears most table saws, including taller cabinet models.
Height range is the VEVOR’s strongest argument. A stand that can go from 33 to 50 inches works with a wide range of equipment: a table saw, a planer on a stand, a bandsaw with a tall table. The multi-directional rollers help when you are feeding sheet goods from the side as well as from the back. Since the listing mentions a 4-in-1 design, read how each mode is configured and make sure the roller mode you need is the one you get.
The 4-in-1 label means it can serve as a roller, a ball-transfer support and other configurations; check the listing for how each mode works. It is the best match for people who want one stand to serve the table saw, planer and drill press.
- 440 lb load capacity per the listing
- Adjustable height 33 to 50 inches
- Folding heavy-duty design
- Multi-directional rollers and a rack, per the title
- Roller configurations: confirm on the listing
Pros
- Tall range suits many machines
- Multi-directional rollers help with sheet goods
Cons
- Minimum height of 33 inches may be above some jobsite saws
- Lower rating than the 660 lb stands
Next to the double-row stand, the VEVOR gives more height but a lower load rating.
Specs Compared
| Model | Type | Height range | Load rating | Surface | Folds |
|---|---|---|---|---|---|
| BORA Adjustable Roller Stand | Single conveyor roller stand | Confirm on listing | Confirm on listing | Roller | Confirm on listing |
| SawStop TSA-FOT | Folding steel table | Adjustable feet | 250 lb per manufacturer | Three roller bars, about 44-1/4 x 32-1/8 in | Yes |
| 660 lb Foldable Roller Conveyor | Roller conveyor table | Confirm on listing | 660 lb per listing | Roller | Yes |
| Rockler Rock-Steady Folding Kit | Frame for custom top | About 22-5/8 to 37-5/8 in | About 150 lb with table | Your panel, about 30-36 x 40-52 in | Yes |
| 660 lb Double-Row Stainless | Roller stand | 24 to 36.6 in | 660 lb per listing | Double-row rollers, 39.4 in long | Yes |
| VEVOR 4-in-1 Roller Stand | Roller stand | 33 to 50 in | 440 lb per listing | Multi-directional rollers | Yes |
How We Chose These
This guide is based on research of catalog listings, not on shop trials. We took the outfeed supports in the current set and compared the listing names with manufacturer pages and manuals where they exist. The criteria were height range, stated load rating, surface type, fold-away design, and how well each product fits the way woodworkers actually use outfeed support: ripping long boards, handling sheet goods, and storing the unit in a tight garage. Where a listing did not state a value, we marked it as something to confirm. No measured performance figures are quoted for any product.
What to Look For
Table or Roller Stand
A table gives a flat surface that supports short parts, panels and glue-ups as well as long boards. A roller stand is lighter and more portable but only carries long stock reliably. If your shop is permanent, a table is the better choice; if you work out of a garage, a folding roller stand is easier to live with. Many woodworkers keep both, using the table for general work and a stand when ripping sheets.
Height Matching
Match the support to the saw table within a sixteenth of an inch. Set the outfeed slightly below the saw top, by about 1/16 to 1/8 inch, so the board never snags on the edge. Cabinet saw tops are commonly around 34 inches high, and jobsite saws on stands run lower, so check the stand’s minimum and maximum heights against yours. A stand with a 24 to 36.6 inch range handles most jobsite saws, while a 33 to 50 inch range suits taller machines.
Load Rating and Real-World Weight
A full 4 by 8 sheet of 3/4-inch plywood often weighs somewhere around 60 to 100 pounds depending on species and core, and the outfeed carries about half of that at a time. A 440 or 660 pound rating is far above that, but a stand that wobbles will still be unsafe. Look at the leg spread, the lock mechanism and whether the feet grip the floor. The rating is a ceiling, not an invitation to load the stand to capacity.
A worked example: when ripping an 8-foot sheet on a saw whose table extends 24 inches behind the blade, the first 24 inches are supported by the saw itself, and roughly 4 feet remain to be caught on the outfeed side. A stand or table that reaches 40 inches or more behind the blade handles that comfortably.
Fit and Compatibility
Tables that bolt on, such as the SawStop and the Rockler, depend on saw design. SawStop lists specific compatible models, and Rockler notes that its kit is not meant for contractor saws with rear-extending motors. Roller stands are free-standing and fit any saw, but they need floor space. Measure the room behind your saw, including the swing of the garage door or the path to the next machine.
Leveling and Setup
Leveling is where outfeed supports succeed or fail. Raise the saw blade to full height, lay a straightedge or a long, flat board across the saw table so it extends over the outfeed support, and adjust the support until the straightedge touches the saw at one end and clears the support by a hair at the other. Check the left and right sides separately, since a floor that is not flat can twist a table frame. Lock the feet or leg clamps, then check again after you put weight on the support, because some stands sink slightly under load.
For roller stands, rotate the rollers by hand to make sure they spin freely, and orient them parallel to the cut line. Rollers that sit at an angle push the board toward or away from the fence, which can pinch the blade. If your shop floor is uneven, place the stand on a piece of plywood and shim it until it does not rock.
Safety
Never lean on an outfeed support while cutting, and do not use it as a seat. Keep the area behind the saw clear so a board that slides off does not trip you. If a board binds or the saw bogs, stop the saw and let the blade stop before you reach in. Fold the support when you are done, and unplug the saw before making any adjustments.
Questions
Do I need an outfeed table for a table saw?
For short parts, not strictly, but for long boards and sheet goods, yes. Without support, the board tips as it leaves the table, which can bind the blade and cause kickback.
How high should the outfeed be?
Aim for the same height as the saw table or a hair below, roughly 1/16 to 1/8 inch. A support that is higher can catch the board and force it up into the blade guard.
Will a roller stand work with a jobsite table saw?
Yes, as long as the stand’s minimum height is lower than your saw table. Jobsite saws on folding stands often sit near 32 inches, so check the range.
Can I build my own outfeed table?
Yes, many woodworkers do. A frame kit such as the Rockler gives you hinges and legs, and you add a flat panel cut from plywood or MDF with a smooth laminate top.
What load rating do I need?
Most home projects stay under 100 pounds, so a rating of 440 pounds or more is plenty. Stability, leg design and floor grip matter more than a bigger number.
Is the SawStop outfeed table compatible with other saws?
No. The manufacturer lists specific SawStop cabinet saws, and says it is not compatible with the Contractor Saw. Confirm your model before choosing it.
Update History
- October 20, 2026 – Initial publication; product set drawn from current catalog listings.
- Check the product page for current specifications and availability before buying.
Sources
- Manufacturer product pages and owner’s manual for the SawStop folding outfeed table
- Manufacturer product page for the Rockler Rock-Steady folding outfeed kit
- Retailer listing titles and specification fields for the BORA, VEVOR and generic roller stands
Write Your Review
No reviews yet. Be the first to share your experience!