Updated Nov 21, 2026· 7 min read

Key takeaways

  • Compare the best woodworking wire strippers for shop wiring, lighting, and tool repairs. Five proven picks with clear gauge ranges and honest trade-offs.

A woodworking shop runs on more than saws and sanders. Lights need wiring, dust collectors need power, machines need new cords, and jigs with switches and motors need clean connections. Every one of those jobs starts the same way: removing insulation from a wire without nicking the copper underneath.

Our top pick: KNIPEX 13 72 8 Forged Wire Stripper. Runner-up: Klein Tools 11061 Self-Adjusting Wire Stripper and Cutter.

Shop wiring is mostly 12 and 14 AWG solid copper for branch circuits, plus 16 to 18 AWG stranded wire for lights, switches, and low-voltage accessories.

As an Amazon Associate, I earn from qualifying purchases.

How to Choose a Wire Stripper for a Woodworking Shop

Start with gauge range. A stripper rated 10 to 20 AWG covers 12 and 14 AWG branch circuits and 16 to 18 AWG lighting and tool cords. A wider 10 to 24 AWG range adds room for thermostat wire and LED lighting.

Next, pick a mechanism. Fixed-hole strippers have a separate notch for each gauge. They are simple and durable, and they give the most control on fine stranded wire. Self-adjusting strippers grip any wire in their range and pull the insulation off in one squeeze, which is faster when you are stripping dozens of identical wires for a panel or a row of outlets. Automatic strippers grip and pull in a single motion, but they cost more.

Look at the extra functions honestly. Many strippers also cut wire, crimp terminals, shear screws, or cut cable sheathing. A built-in cutter saves a trip back to the toolbox, and a crimper helps if you terminate many spade and ring terminals. But a tool that does everything often does one job less well than a dedicated tool. Grip matters too: cushioned grips reduce fatigue, and shorter tools fit inside electrical boxes. Also check whether the tool handles cable jackets, since stripping NM-B cable, also called Romex, differs from stripping a single conductor.

Safety deserves a plain note. Never strip wire on a live circuit. Switch the breaker off, confirm the circuit is dead with a tester, and wear eye protection.

Comparison Table

Tool Type Stripping Range Extra Functions Length
KNIPEX 13 72 8 Forged Wire Stripper Fixed-hole 10-20 AWG Cuts cable; shears screws; crimps 8 inches
Klein Tools 11061 Self-Adjusting Stripper Self-adjusting 10-20 AWG solid, 12-22 AWG stranded Cuts wire; strips Romex cable 8.25 inches
IRWIN Vise-Grip 2078300 Self-Adjusting Stripper Self-adjusting 10-24 AWG Cuts wire; crimps terminals 8 inches
KNIPEX 12 62 180 Automatic Wire Stripper Automatic 10-24 AWG Cuts wire; adjustable length stop 7.25 inches
WGGE WG-015 Professional Wire Stripper Fixed-hole multi-tool 10-22 AWG Cuts, loops, and crimps 8 inches

KNIPEX 13 72 8 Forged Wire Stripper

The KNIPEX 13 72 8 is the heavy-duty pick, and its forged construction is the reason. Forged steel jaws feel solid, and the shear blades cut with less effort. Its range covers 10 to 20 AWG solid and stranded wire, taking in the 12 and 14 AWG circuits most shops are wired with, plus 16 and 18 AWG lighting and tool cords. Its shear blades also cut NM-B, BX, and MC cable. The trade-offs are weight and range: at about 10.6 ounces it is heavier than slim manual strippers, and it does not reach below 20 AWG.

  • Specs:
  • Model: 13 72 8
  • Stripping range: 10-20 AWG solid and stranded
  • Length: 8 inches
  • Weight: 10.6 ounces
  • Construction: Forged steel with shear-cutting blades
  • Cable cutting: NM-B, BX, and MC cable
  • Screw cutting: 6-32 and 8-32, from front or back
  • Crimping: 12-20 AWG end sleeves

Klein Tools 11061 Self-Adjusting Wire Stripper and Cutter

The Klein 11061 is the best fit for a woodworker who strips a lot of wire in a row and wants the tool to do the adjusting. Its self-adjusting head grips solid wire from 10 to 20 AWG and stranded wire from 12 to 22 AWG, so you can move from a 12 AWG branch circuit to an 18 AWG lamp lead without touching a dial. An adjustable stopper sets a consistent strip length for repeated work. It also strips 12/2 and 14/2 Romex cable. The built-in cutter cuts up to 8 AWG solid wire. The 11061 is the heaviest tool in this group at 12.6 ounces, and self-adjusting mechanisms can struggle with very fine stranded wire, where a fixed hole gives more control.

  • Specs:
  • Model: 11061
  • Stripping range: 10-20 AWG solid, 12-22 AWG stranded
  • Romex compatibility: 12/2 and 14/2
  • Length: 8.25 inches
  • Weight: 12.6 ounces
  • Features: Self-adjusting head, adjustable stopper, tensioning thumb wheel
  • Cutter: Built-in, up to 8 AWG solid wire

IRWIN Vise-Grip 2078300 Self-Adjusting Wire Stripper

The IRWIN 2078300 is the value pick among the self-adjusting tools, and it covers the widest gauge range in this group. It strips 10 to 24 AWG wire without any adjustment, reaching the thin thermostat and LED wiring that stops the heavier strippers at 20 or 22 AWG. A swivel knob micro-adjusts the grip for gauges smaller than 20 AWG. The adjustable stopper keeps strip lengths even. The compromise is refinement: the mechanism has more moving parts than a fixed-hole stripper and will wear over years of hard use in a dusty shop rather than being rebuilt.

  • Specs:
  • Model: 2078300
  • Stripping range: 10-24 AWG
  • Jaw width: 2 inches
  • Length: 8 inches
  • Features: Self-adjusting mechanism, swivel knob micro-adjustment, adjustable stopper
  • Crimping: 10-22 AWG insulated and non-insulated terminals, 7-9 mm ignition terminals
  • Guarantee: Lifetime

KNIPEX 12 62 180 Automatic Wire Stripper

The KNIPEX 12 62 180, also sold as the ComStrip, is the premium automatic pick. One squeeze grips the wire and pulls the insulation off, with no notch to choose and no dial to set. It handles 10 to 24 AWG wire, covering shop circuits, lighting, and low-voltage wiring. At 7.25 inches it is the most compact tool here. Replaceable blades mean you swap the edge instead of the whole tool. The 12 62 180 costs more than the other picks, and it has no crimping function, so terminal work needs a separate crimper.

  • Specs:
  • Model: 12 62 180
  • Stripping range: 10-24 AWG, 0.2-6 square millimetres
  • Length: 7.25 inches
  • Features: Self-adjusting automatic stripping, adjustable length stop
  • Blades: Replaceable
  • Cutter: Built-in wire cutter

WGGE WG-015 Professional Wire Stripper, Cutter, and Crimper

The WGGE WG-015 is the budget multi-tool of the group, and it earns its place by doing three jobs in one 8-inch tool. It strips, cuts, loops, and crimps 10 to 22 AWG wire, so occasional electrical work needs one tool instead of three. High carbon alloy steel keeps the stripping holes accurate. Its 10 to 22 AWG range reaches lighting and control wire. The looping holes help form the hooks that wrap around outlet and switch screws, a small detail that speeds up device wiring. The limits are honest ones: the cutter is made for stranded copper, so it is not the tool for cutting solid copper often, and it has no Romex jacket range or screw shearing, so heavy cable work belongs to a bigger tool.

  • Specs:
  • Model: WG-015
  • Stripping range: 10-22 AWG
  • Length: 8 inches
  • Material: High carbon alloy steel
  • Functions: Strips, cuts, loops, and crimps
  • Warranty: 24 months

Which Wire Stripper Should You Pick

Match the tool to the wire you strip most often. If you wire new circuits and cut cable, the KNIPEX 13 72 8 is the strongest choice. If you strip many wires in a row for a panel, a lighting run, or a row of outlets, the Klein 11061 is the better pick. If your work jumps between heavy circuits and thin low-voltage wire, the IRWIN 2078300 covers the widest range in one tool. For speed in tight spaces, the KNIPEX 12 62 180 is the fastest and most compact. For occasional repairs and a first stripper on a modest budget, the WGGE WG-015 covers the common gauges and adds crimping.

Frequently Asked Questions

What gauge wire stripper do I need for a woodworking shop?

A stripper rated 10 to 20 AWG covers most shop work, including 12 and 14 AWG branch circuits and 16 to 18 AWG lighting and tool cords. For LED lighting or low-voltage controls, choose a tool that reaches 24 AWG.

Are self-adjusting wire strippers better than fixed-hole strippers?

Neither type is better in every job. Self-adjusting strippers are faster when you strip many wires of mixed gauges, because you never choose a notch. Fixed-hole strippers give more control, especially on fine stranded wire, and they have fewer moving parts to wear out.

Can a wire stripper cut NM-B cable?

Some can, and some cannot. The KNIPEX 13 72 8 lists NM-B, BX, and MC cable cutting in its specs, and the Klein 11061 strips 12/2 and 14/2 Romex cable.

How do I strip wire without nicking the copper?

Choose the hole that matches the wire gauge exactly. Squeeze firmly and pull the insulation straight off without twisting, and inspect the bare copper before you connect it. If you see a nick or a cut strand, trim the wire and strip it again.

Conclusion

A wire stripper is a small tool with an outsized effect on shop safety and on the quality of every electrical connection you make. Each of the five has a clear strength: forged cable cutting, self-adjusting speed, wide gauge range, automatic convenience, or budget multi-tool value. Pick the one that matches your most common wire and job.

T
Table Saw Blog Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Woodworking Wire Strippers: 5 Top Picks ComparedCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.