Updated Nov 21, 2026· 7 min read

Key takeaways

  • Compare the best inlay kits for woodworking, from brass bushing sets to bowtie, circle and square templates, and pick the right fit for your router.

A well-cut inlay turns a plain board into a piece people stop and look at. A bow tie across a crack or a square medallion in a box lid says somebody took the time to do it right. The hard part is the fit. An inlay that sits proud of the surface catches every fingertip, and one that leaves a visible gap looks unfinished. A router inlay kit cuts both from the same template, so they meet with a tight, even seam. This guide compares five inlay kits, covering brass bushing kits and acrylic template sets. As an Amazon Associate, I earn from qualifying purchases.

Our top pick: Freud FT1500 Inlay Template Guide Set. Runner-up: Rockler Nested Bow Tie Inlay Template Set.

How to Choose an Inlay Kit for Woodworking

Start by deciding which kind of inlay you want to cut. Brass bushing kits are the general-purpose choice. A guide bushing rides against the template edge while the bit cuts inside it, and a removable collar changes the offset so the same template cuts both the pocket and the insert. That makes them right for one-off shapes, letters, and custom designs where you make your own template from thin plywood or hardboard. Template sets hand you ready-made shapes such as bow ties, circles, and squares, and suit repeatable details on cracked slabs, charcuterie boards, and box lids.

Check router compatibility before anything else. A bushing kit needs a sub-base with an opening the bushing fits, and many kits are sized for the common 1-3/16-inch or 1-1/4-inch base plate opening. Template sets are more forgiving, since the template sits on the workpiece, but you still need a bit and bushing combination that matches the template thickness.

Bit size matters more than most beginners expect. A 1/8-inch bit reaches into tight corners that a 1/4-inch bit cannot, and a downcut spiral bit leaves cleaner top edges on the pocket, because it pushes chips down into the cut instead of lifting them out and fraying the surface. Cut in shallow passes: a 1/8-inch bit bends and chatters when asked to remove too much at once. Acrylic templates are transparent, so you can place a bow tie exactly over a crack, and thicker acrylic around 6 mm holds its edge better.

Finally, think about what the kit leaves out. Some kits include the bushing, collar, centering pin, and bit. Others are templates only, and you supply your own bushing set and bit, so compare the full setup, not just the box contents.

Comparison Table

Kit Type Shapes included Bit included Best for
Freud FT1500 Brass bushing kit Custom templates Yes General inlay work
Rockler Nested Bow Tie Acrylic template set Bow ties, 1 to 4 inches No Crack repair and decoration
Fuyoooo 14-Piece Acrylic template set Bow ties, handles, tray edges No Charcuterie boards and trays
BENECREAT 9-Piece Squares Acrylic template set Squares, 9 sizes No Geometric medallions
inBovoga 3-Piece Circles Acrylic template set Circles, 3.92 inches No Round medallions and plugs

The 5 Best Inlay Kits for Woodworking

1. Freud FT1500 Inlay Template Guide Set

The Freud FT1500 is the classic dedicated inlay kit, and the only pick here that pairs the guide hardware with a router bit in the same box. It is built around the offset method: a template guide bushing follows your template for the pocket cut, then a collar changes the offset so the same template cuts the matching insert. That two-pass trick makes the fit tight, and it works with any shape you can cut into a template. The included bit is sized for the bushing and collar combination, so there is no guessing about which bit diameter keeps the offset math correct. Keep the bushing centered on the bit, since one running off-center cuts a pocket wider on one side than the other.

  • Specs:
  • Type: brass template guide bushing kit with router bit
  • Model: FT1500
  • Brand: Freud
  • Includes: template guides and a router bit
  • Method: offset collar cuts pocket and insert from one template
  • Best for: custom-shaped inlays and first-time inlay setups

2. Rockler Nested Bow Tie Inlay Template Set

The Rockler Nested Bow Tie set gives you the most popular inlay of all in four sizes: 1, 2, 3, and 4 inches. The templates nest for flat storage, covering hairline cracks in small boxes to wide splits in slab tabletops. They are cut from 6 mm acrylic, thick enough to guide a bushing firmly and transparent enough to place the bow tie exactly where the crack runs. This is a template-only set, so you supply the bushing, collar, and bit yourself.

  • Specs:
  • Type: acrylic template set, templates only
  • Sizes: 1, 2, 3, and 4 inches, nested
  • Material: 6 mm acrylic
  • Pieces: 4 templates
  • Brand: Rockler
  • Best for: stabilizing cracks in slabs, tabletops, and boxes

3. Fuyoooo 14-Piece Router Template Set

The Fuyoooo set is the broadest template collection in this guide, with 14 pieces covering three jobs that often appear together on serving boards and trays. It includes six acrylic charcuterie board handle guides, bow tie inlay templates, and two tray edge templates, plus angled curvy tracing stencils, tape, and pens. That mix suits charcuterie boards, serving trays, and gift pieces where a handle cutout and an inlay share one project. As with most template sets, the bushing and bit are up to you, and a 1/8-inch downcut spiral bit suits the tight curves of the handle and bow tie shapes.

  • Specs:
  • Type: acrylic template set, templates only
  • Pieces: 14, including 6 handle guides, bow tie templates, and 2 tray edge templates
  • Extras: angled curvy tracing stencils, tape, and pens
  • Material: acrylic
  • Best for: charcuterie boards, serving trays, and gift pieces

4. BENECREAT 9-Piece Square Router Templates

The BENECREAT set is for woodworkers who like geometric inlays. It includes nine square templates from 9.8 inches down to 1.4 inches, stepping through 8.5, 7.4, 6.5, 5.5, 4.5, 3.5, and 2.5 inches in between. That range covers a large tabletop medallion down to a small box-lid accent, and the even steps suit nested squares for a framed effect. A round bit cannot cut a perfectly square inside corner, so round the insert corners to match, or clean them up with a sharp chisel. This is a template-only set, and you will need a bushing and bit to use it.

  • Specs:
  • Type: acrylic template set, templates only
  • Pieces: 9 square templates
  • Sizes: 9.8, 8.5, 7.4, 6.5, 5.5, 4.5, 3.5, 2.5, and 1.4 inches
  • Material: transparent acrylic
  • Best for: square medallions, nested frames, and box lids

5. inBovoga 3-Piece Circle Router Templates

The inBovoga set keeps things simple: three circle templates, each 4 inches by 3.92 inches, for round inlays and plugs. Circles are one of the most forgiving inlay shapes, because there are no corners to clean up and the bit follows the curve in one smooth pass. They suit round medallions, plugs that cover a knot or screw hole, and decorative dots repeated across a panel. Keep one template for the pocket cut, one for the insert, and one as a spare. Like the other template sets here, you supply the bushing and bit, and a downcut spiral bit keeps the top edge of the circle clean.

  • Specs:
  • Type: acrylic template set, templates only
  • Pieces: 3 circle templates
  • Size: 4 by 3.92 inches each
  • Brand: inBovoga
  • Best for: round medallions, plugs, and knot repairs

Which Inlay Kit Should You Pick

Pick the Freud FT1500 for any shape you can draw, with bit and offset hardware included. Pick the Rockler bow tie set for stabilizing cracks in slabs and tabletops. Pick the Fuyoooo set for charcuterie boards and serving trays. Pick the BENECREAT set for geometric medallions and nested frames. Pick the inBovoga set for simple round inlays and plugs. Only the Freud kit includes a bit: the four template sets need a bushing kit and bit, so factor that into the total cost.

FAQ

What is a router inlay kit?

A router inlay kit is a set of templates, guide bushings, or both that helps you cut a recess and a matching insert for decorative inlay work. Bushing kits use an offset collar so one template cuts both halves, while template sets give you ready-made shapes such as bow ties, circles, and squares.

Do I need a special router for inlay work?

Most full-size and compact routers work for inlay, as long as the base accepts a template guide bushing. Check the base plate opening size against the bushing kit before ordering.

What size router bit works best for inlays?

A 1/8-inch bit is the usual choice for inlay work, because it reaches into tight corners and fine details that larger bits cannot. A downcut spiral bit leaves the cleanest top edge. Take shallow passes, since a thin bit bends when it removes too much at once.

Can I make my own inlay templates?

Yes. Cut a template from 1/4-inch hardboard or plywood, and use it with a bushing kit that cuts the pocket and the insert from the same shape. Keep the template edge smooth, since every bump in the template shows up in the cut.

Conclusion

Inlay work rewards patience more than fancy equipment, but the right kit removes the guesswork that makes beginners give up. A brass bushing kit such as the Freud FT1500 covers any shape you can draw, while the template sets in this guide hand you bow ties, circles, and squares ready to rout. Match the kit to the work you do, confirm the bushing fits your router base, and practice on scrap first.

T
Table Saw Blog Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Inlay Kits for Woodworking: 5 Top Picks…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.