Updated Nov 21, 2026· 7 min read

Key takeaways

  • Compare the best drill bit sharpeners for woodworking, from electric Drill Doctor models to bench grinder attachments, and find the right one for you.

A dull twist bit wanders off the mark, burns the wood, and tears the exit hole. A drill bit sharpener brings a dull bit back to a clean, even point without a long learning curve.

Our top pick: Drill Doctor 750X. Runner-up: Drill Doctor 500X.

This guide compares five sharpeners for a woodworking shop: three electric models and two bench grinder attachments, each for standard twist bits used for pilot, dowel, and hardware holes.

As an Amazon Associate, I earn from qualifying purchases.

How to Choose a Drill Bit Sharpener for Woodworking

Start with bit size. Most woodworking twist bits fall between 1/8 inch and 1/2 inch, so a sharpener covering 3/32 inch to 1/2 inch handles nearly everything a furniture maker owns. For larger twist bits, look for a model that reaches 3/4 inch.

Point angle comes next. A 118-degree point is the standard for general drilling in wood. A 135-degree point is flatter and suits harder materials, and some woodworkers prefer it for dense hardwoods because the bit starts with less wandering. A sharpener offering both angles gives more choice; a fixed 118-degree model is simpler and covers the most common work.

Split points matter too: a small notch ground into the tip helps the bit start on the mark without a center punch, and sharpeners that create or restore split points keep that self-centering behavior.

Finally, decide between a self-contained electric sharpener and an attachment. An electric sharpener is ready out of the box: plug it in, seat the bit, and grind. An attachment costs less and takes up little space, but needs a bench grinder. If you already own a bench grinder, an attachment adds bit sharpening to your shop. Note that all five picks are built for standard twist bits, not Forstner, spade, step, or router bits.

Comparison Table

Sharpener Bit Size Range Point Angles Type
Drill Doctor 750X 3/32 to 3/4 inch 115 to 140 degrees Electric
Drill Doctor 500X 3/32 to 1/2 inch 118 or 135 degrees Electric
Drill Doctor 350X 3/32 to 1/2 inch 118 degrees Electric
Woodstock D4144 1/8 to 3/4 inch Multiple angles Grinder attachment
General Tools 825 1/8 to 3/4 inch Multiple angle settings Grinder attachment

The 5 Best Drill Bit Sharpeners for Woodworking

1. Drill Doctor 750X

The Drill Doctor 750X is the top model in the range, and the pick for a woodworker who sharpens bits often and wants the widest adjustment. Its point angle adjusts from 115 to 140 degrees, so you can match the factory angle of almost any twist bit or grind a flatter point for dense hardwood. It also creates and restores split points, which help bits start cleanly without wandering.

It sharpens bits from 3/32 inch to 3/4 inch, from small pilot bits to larger dowel and hardware bits. Its replaceable 180-grit diamond wheel handles high-speed steel, carbide, cobalt, masonry, and titanium-coated bits.

  • Specs:
  • Bit size range: 3/32 to 3/4 inch
  • Point angle: adjustable from 115 to 140 degrees
  • Grinding wheel: 180-grit diamond, replaceable
  • Split point: creates and sharpens split points
  • Bit types: high-speed steel, carbide, cobalt, masonry, titanium-coated
  • Warranty: 3-year manufacturer warranty

2. Drill Doctor 500X

The Drill Doctor 500X is the middle model in the range, and the balance most woodworking shops need. It sharpens twist bits from 3/32 inch to 1/2 inch, covering the pilot, dowel, and hardware bits used in nearly every furniture project. It grinds both 118-degree and 135-degree points, and has a dedicated port for creating split points.

Seat the bit in the chuck, align it, and grind each edge in turn. The replaceable diamond wheel keeps its shape over time. The main trade against the larger model is capacity: bits larger than 1/2 inch need the 750X instead.

  • Specs:
  • Bit size range: 3/32 to 1/2 inch
  • Point angle: adjustable 118 or 135 degrees
  • Grinding wheel: replaceable diamond wheel
  • Split point: dedicated port for creating split points
  • Bit types: steel, masonry, carbide, titanium-coated
  • Warranty: 3-year manufacturer warranty

3. Drill Doctor 350X

The Drill Doctor 350X is the entry model in the range, built for woodworkers who want simple sharpening without extra adjustments. It grinds a single 118-degree point, the standard angle for wood and light metal, and covers bits from 3/32 inch to 1/2 inch.

Its front-loading chuck uses on-chuck alignment, so there is no separate alignment port to learn. The diamond wheel holds its shape and runs cool, so bits do not overheat and lose their temper. The compact size suits a small shop. The trade is flexibility: no 135-degree option and no split point port, so woodworkers who want those features should step up to the 500X.

  • Specs:
  • Bit size range: 3/32 to 1/2 inch
  • Point angle: 118 degrees
  • Grinding wheel: industrial-strength diamond wheel, replaceable
  • Alignment: on-chuck alignment, no separate alignment port
  • Bit types: high-speed steel, carbide, masonry, titanium-coated
  • Warranty: 3-year manufacturer warranty

4. Woodstock D4144 Drill Bit Sharpener

The Woodstock D4144 is a jig that works with a bench grinder you already own. Clamp the bit in the sharpener, set the point angle, and hold the jig against the grinding wheel. With no motor or cord, it stays small, simple, and easy to store.

Its range is generous for an attachment: bits from 1/8 inch to 3/4 inch at multiple point angles, so you can match the angle of the bit you are restoring. The catch is clear: the D4144 is useless on its own. You need a bench grinder with a suitable wheel, and the edge depends on that wheel and on your steady hand.

  • Specs:
  • Bit size range: 1/8 to 3/4 inch
  • Point angle: adjustable to multiple point angles
  • Type: bench grinder attachment, needs a separate grinder
  • Construction: metal
  • Weight: 1.4 pounds

5. General Tools 825 Drill Grinding Attachment

The General Tools 825 is another bench grinder attachment, and the most adjustable jig-style option in this guide. It mounts to a bench grinder and holds the bit at a chosen angle while you grind, giving control over the point without freehand guesswork. It fits bits from 1/8 inch to 3/4 inch.

It supports several standard angle settings listed on the product page, including 88, 68, 59, 49, and 41 degrees, so you can restore bits ground to different angles over the years. The sturdy metal build keeps the bit steady against the wheel, which produces an even edge on both sides. Like the Woodstock, it needs a bench grinder, and the finish depends on the wheel fitted to your grinder.

  • Specs:
  • Bit size range: 1/8 to 3/4 inch
  • Angle settings: standard settings listed as 88, 68, 59, 49, and 41 degrees
  • Type: bench grinder attachment, needs a separate grinder
  • Construction: sturdy metal

Which Drill Bit Sharpener Should You Pick

Choose the Drill Doctor 750X if you sharpen bits often, own bits up to 3/4 inch, and want the widest angle adjustment plus split point support. Choose the Drill Doctor 500X if your bits top out at 1/2 inch and you want both 118-degree and 135-degree points with split point support; it is the best balance for most woodworking shops. Choose the Drill Doctor 350X if you want the simplest electric sharpener and all your bits use the standard 118-degree point.

Choose the Woodstock D4144 if you already own a bench grinder and want a low-cost way to sharpen bits from 1/8 to 3/4 inch at several angles. Choose the General Tools 825 if you already own a bench grinder and want a sturdy jig with several angle settings for a large set of dull bits. Whichever you pick, practice on a dull bit first and test it in a scrap offcut before drilling into a finished piece.

FAQ

Can a drill bit sharpener sharpen Forstner bits?

No. The sharpeners in this guide are built for standard twist bits. Forstner bits have a different cutting geometry, with a rim and two cutting edges that need hand sharpening with a fine file or a diamond card.

What point angle should I use for drilling wood?

A 118-degree point is the standard choice for general drilling in wood. A flatter 135-degree point can help in dense hardwood by starting the hole with less wandering, but it is not needed for softwood or sheet goods.

How do I know when a drill bit needs sharpening?

A dull bit needs more pressure to start, produces dust instead of clean shavings, and may burn the wood around the hole. If the hole edges look torn or the bit heats up quickly, it is time to sharpen.

Can I sharpen a broken drill bit?

A bit with a broken tip can often be reshaped if enough length remains, and the Drill Doctor 750X is described as able to restore broken bits. A bent bit or one with cracks in the shank should be discarded instead.

Conclusion

Sharp bits make woodworking cleaner, safer, and more accurate. The Drill Doctor 500X is the pick for most shops, with the 750X ahead for larger bits and wider angles, the 350X for simple everyday sharpening, and the Woodstock D4144 or General Tools 825 for woodworkers who already own a bench grinder.

T
Table Saw Blog Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Drill Bit Sharpeners for Woodworking: 5 PicksCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.