Key takeaways
- Find the best woodworking saw files for hand saws and chainsaws. Compare shapes, cuts, sizes, and kits to keep every tooth sharp and cutting clean.
A dull saw wanders off the line, tears fibres, and binds in the kerf. A good saw file fixes that. With the right shape, cut, and size, you can bring a tired hand saw back to life and keep a chainsaw chain biting cleanly.
As an Amazon Associate, I earn from qualifying purchases.
The best woodworking saw files are not all the same. A triangular taper file fits between hand saw teeth. A flat mill file levels teeth and sharpens straight edges. A round file matches the curve of a chainsaw cutter. A kit bundles several sizes with a handle and a guide, so you can work on more than one saw with one purchase.
How to Choose a Saw File
Start with the saw you plan to sharpen. Hand saws, backsaws, and dovetail saws need a triangular taper file, because its three faces sit in the gullets between teeth. Chainsaws need round files matched to chain pitch, plus a flat file for depth gauges. Circular saw blades and scrapers are usually dressed with a flat mill file. If you own several saws, a kit with more than one size saves repeat trips to the store.
Match the file size to the tooth size. The face of the file should be a little more than twice as long as the face of the tooth it files. A file that is too large will bridge across teeth and round the points. A file that is too small will drop too deep into the gullet. For coarse rip saws, a 7 inch or 8 inch taper file is a sensible starting point. For finer backsaws, a 5 inch or 6 inch extra slim taper file gives better control. For chainsaws, check the chain marking first. Common round file sizes are 5/32 inch, 3/16 inch, and 7/32 inch.
Cut matters as much as shape. Single cut files leave a smoother surface and are the usual choice for sharpening saw teeth. Double cut files remove metal faster and suit rough shaping. Bastard cut is coarse, second cut sits in the middle, and smooth cut is finest. Many saw files are sold without a handle, so fit one before a long session. A good file is made from high carbon steel. Files cut on the push stroke only, so lift on the return, keep the teeth clean, and store files apart.
Comparison Table
| Product | Type | Best For | Length | Cut |
|---|---|---|---|---|
| Nicholson 12 Inch Mill File | Flat mill file | Jointing teeth and straight edges | 12 inch | Single cut, bastard |
| Nicholson 10 Inch Mill File | Flat mill file | Smaller saws and scrapers | 10 inch | Single cut, bastard |
| Stihl 2 in 1 Easy File 0.325 Inch | Combination file tool | Chainsaw cutters and depth gauges | Compact handheld | Round plus flat |
| Katzco Chainsaw Sharpener File Kit | 8 piece kit | Several chainsaw chain sizes | 6 inch flat file | Fine tooth |
| Husqvarna Chainsaw File Kit | Kit with guide | 3/8 inch pitch chainsaw chains | Round and flat files | Fine tooth |
Nicholson 12 Inch Mill Single Cut Bastard File
This long flat file is the pick for jointing saw teeth, dressing a straight edge, or smoothing a scraper. The 12 inch length gives a long, steady stroke that helps keep the file level, and the single cut bastard pattern removes metal at a useful rate without leaving a deeply scored surface. It also handles draw filing and deburring. It is sold carded without a handle, so fit one before heavy use.
- Specs:
- Brand: Nicholson
- Model: 21842NN
- Length: 12 inch
- Shape: Flat mill file, rectangular
- Cut: Single cut, bastard
- Material: High carbon steel
- Handle: Not included
- Use: Jointing saw teeth, sharpening mill and circular saws, draw filing
Nicholson 10 Inch Mill Single Cut Bastard File
The 10 inch version suits smaller saws, backsaws, and bench work where a 12 inch file feels unwieldy. It keeps the same single cut bastard pattern and rectangular shape, but the shorter length gives more control in tight spaces and on shorter blades. It works well for topping saw teeth before reshaping them, for sharpening scrapers, and for smoothing straight metal edges. Like the larger model, it is sold carded without a handle.
- Specs:
- Brand: Nicholson
- Model: 08642NN
- Length: 10 inch
- Shape: Flat mill file, rectangular
- Cut: Single cut, bastard
- Material: High carbon steel
- Handle: Not included
- Use: Jointing smaller saw teeth, scrapers, straight edge work
Stihl 2 in 1 Easy File Chainsaw Chain Sharpener 0.325 Inch
This handheld tool sharpens a chainsaw cutter and files the depth gauge in the same stroke. That two-in-one action suits field sharpening, where time and bench space are limited. The round file matches 0.325 inch pitch chain, and the built-in flat file keeps the depth gauge at the right height. Guides help you keep a consistent filing angle, which matters because a chain sharpened at the wrong angle will cut slowly and pull to one side. Check your chain marking before you order.
- Specs:
- Brand: Stihl
- Size: For 0.325 inch pitch chainsaw chain
- Type: Combination round file and flat depth gauge file
- Action: Sharpens cutter and depth gauge in one stroke
- Form: Compact handheld filing tool with angle guides
- Use: Field sharpening of chainsaw chains
- Handle: Integrated grip
Katzco Chainsaw Sharpener File Kit
This kit is the value choice for anyone who sharpens more than one chainsaw. It includes round files in 5/32 inch, 3/16 inch, and 7/32 inch sizes, covering the most common chain pitches, plus a 6 inch flat fine tooth file for depth gauges. A hardwood handle accepts the files in turn, a filing guide helps hold the angle, and a depth gauge tool checks the raker height. Everything packs into a roll-up tool pouch that keeps the files separate and easy to find.
- Specs:
- Brand: Katzco
- Pieces: 8 piece kit
- Round files: 5/32 inch, 3/16 inch, and 7/32 inch
- Flat file: 6 inch fine tooth
- Included: Hardwood handle, filing guide, depth gauge tool, tool pouch
- Use: Sharpening and filing chainsaw chains and other blades
- Storage: Roll-up pouch
Husqvarna Chainsaw File Kit for 3/8 Inch Pitch Chains
This focused set is made for 3/8 inch pitch chainsaw chains. It includes a handle, a combination guide, and flat and round files, so you can sharpen the cutters and dress the depth gauges with the parts in one box. The guide holds the round file at the correct height and angle, which helps a less experienced sharpener get consistent results from tooth to tooth. File from the inside of the cutter outward, and count your strokes so each tooth gets the same treatment.
- Specs:
- Brand: Husqvarna
- Chain pitch: 3/8 inch
- Included: Handle, combination guide, flat file, round files
- Use: Sharpening 3/8 inch pitch chainsaw chains
- Guide: Combination file guide for angle and depth
- Form: Kit for field and workshop use
Which Woodworking Saw File Should You Pick
If you sharpen hand saws, start with a mill file for jointing and a triangular taper file for the teeth. The Nicholson 12 inch mill file suits large hand saws, while the 10 inch file suits smaller saws. If you sharpen chainsaws, match the file to the chain first. The Stihl 2 in 1 Easy File is fastest for one 0.325 inch chain, because it files the cutter and the depth gauge together. The Husqvarna kit suits one 3/8 inch pitch chain, and the Katzco kit suits several chainsaws, because its three round file sizes cover the common pitches in one pouch.
Frequently Asked Questions
What size saw file do I need for a hand saw?
Match the file to the tooth size, not to the length of the saw. The face of the file should be a little more than twice as long as the face of the tooth. Coarse rip saws take a larger taper file, often 7 inch or 8 inch, while finer backsaws and dovetail saws take a 5 inch or 6 inch extra slim taper file.
Can I use a mill file to sharpen a hand saw?
Yes. A mill file is used to joint the teeth, filing the tips level before you reshape them with a triangular taper file. It also sharpens scrapers and straight edges. Do not try to file between saw teeth with a mill file, because its rectangular shape will not fit the gullets.
How do I know which round file fits my chainsaw chain?
Check the chain marking or the saw manual for the pitch, then match the round file diameter to that pitch. Common sizes are 5/32 inch, 3/16 inch, and 7/32 inch. A kit with all three sizes removes the guesswork if you own more than one saw.
How long does a saw file last?
A good saw file lasts through many sharpenings, but it is a consumable tool. File on the push stroke only, lift on the return, keep the teeth clean, and store it where its teeth cannot rub against other files. Replace it when it glides over metal without biting.
Conclusion
The best woodworking saw files match your saw, your tooth size, and the way you work. A Nicholson mill file handles jointing and straight edge work. A Stihl tool or a Husqvarna or Katzco kit keeps a chainsaw chain cutting cleanly. Choose the shape and size first, fit a handle, file with a steady angle, and keep the file clean.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!