Key takeaways
- Compare the best thin rip jigs for table saws by miter slot fit, adjustment range and scale type, so you can rip repeatable narrow strips cleanly.
Ripping a pile of identical thin strips on a table saw is awkward with a rip fence alone, because the narrow offcut ends up trapped between the blade and the fence. A thin rip jig solves that problem by locking into the miter slot on the left of the blade and acting as a fixed reference point: you set the jig once, register the board against its bearing, move the fence up to the board, and every strip that falls away on the blade side comes out the same width.
The five jigs below follow that same basic idea, but differ in slot fit, adjustment range, scale type and build. This guide compares their published specifications so you can match a jig to your saw’s miter slot and the strip widths you cut most often, whether that is plywood edging, kumiko stock, bent lamination layers or glass retainer strips.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most standard table saws, the GOINGMAKE Thin Rip Jig is the easiest pick: it fits T-slots and U-slots, adjusts from 2-5/8 to 8 inches, and carries laser-engraved scales. The Peachtree 3096 is the compact budget option for standard 3/4 by 3/8 inch slots, while the DDWT Ultimate Version suits woodworkers who want a longer sliding body that also works on router tables and band saws.
GOINGMAKE Thin Rip Jig (Model GM8)
The GOINGMAKE jig is an aluminum alloy guide that slides into the miter slot and locks down in front of the blade, giving the workpiece a bearing point to register against before each pass. Its standout specification is slot versatility: the maker lists fitment for 3/8 by 3/4 inch T-slots, U-shape slots and the smaller 1/4 by 3/8 inch T-slots on some benchtop saws, covering full-size and compact machines without extra hardware.
The adjustment range runs from 2-5/8 inches to 8 inches, measured from the center of the miter slot to the blade, and the maker states it can produce strips as thin as 1/32 inch. Laser-engraved scales in imperial and metric units handle the measuring, so repeat setups rely on the scale rather than on a separate reference block. GOINGMAKE also rates the jig for use on band saws and router tables, which extends its value beyond the table saw. It sits in the mid-range tier of this group.
Specs
- Material: aluminum alloy
- Miter slot fit: 3/8 x 3/4 inch T-slot, U-shape slot, 1/4 x 3/8 inch T-slot
- Adjustment range: 2-5/8 to 8 inches from miter slot center to blade
- Minimum strip width: 1/32 inch (maker-stated)
- Scale: laser-engraved, imperial and metric
- Compatibility: table saw, band saw, router table
- Part number: GM8
DDWT Thin Rip Jig Ultimate Version (Model GD704C)
The DDWT Ultimate Version is a red aluminum alloy jig built around what the maker calls an adjustable sliding tenon design: the body slides to set the strip width and locks in the miter slot ahead of the blade. At 7.2 inches long, the body is longer than the compact jigs in this roundup, which gives the workpiece a longer reference surface as it approaches the cut.
DDWT lists the jig for table saws, router tables and band saws, so one jig can cover repeat narrow cuts across three machines. It is a mid-range option for woodworkers who rip thin strips frequently and want a more substantial body than the smallest pocket-size guides provide.
Specs
- Material: aluminum alloy
- Color: red
- Design: adjustable sliding tenon
- Dimensions: 7.2 x 3.2 inches
- Compatibility: table saw, router table, band saw
- Model number: GD704C
- Part number: DD230728
Peachtree Woodworking Supply Thin Rip Jig (Model 3096)
Peachtree Woodworking Supply has sold its Thin Rip Jig, model 3096, for many years, and it remains the simplest design in this group. The compact jig drops into a standard 3/4 by 3/8 inch miter slot and positions a single guide point to the left of the blade, so repetitive thin rip cuts are made on the left side of the blade while the fence supports the wider part of the board on the right.
The listed dimensions are just 4 by 3 by 3 inches, so it stores in a drawer. Peachtree notes that it also works with many router tables and band saws that share the same standard slot size. There is no telescoping arm or digital readout here; you set the width against the blade or with a setup block and lock it down. For occasional edging and strip work on a standard-slot saw, this budget-tier jig covers the essentials.
Specs
- Miter slot fit: standard 3/4 x 3/8 inch miter slots
- Dimensions: 4 x 3 x 3 inches
- Compatibility: table saws, many router tables and band saws
- Model number: 3096
- Maker: Peachtree Woodworking Supply Inc.
SakerPlus Thin Rip Jig (Model FC-151)
The SakerPlus FC-151 is a compact thin rip jig guide for repetitive narrow strip cutting on table saws, band saws and router tables. It fits the common 3/8 by 3/4 inch T-slot, and at 15.8 ounces it is a light, small-format guide, with package dimensions of 7.76 by 3.82 by 2.01 inches.
The FC-151 follows the same workflow as the other jigs here: slide it into the slot in front of the blade, set the distance for the strip width, lock it, then bring the fence up to the stock registered against the jig. Its small footprint suits benchtop and contractor saws where table space in front of the blade is limited. It sits in the budget tier of this group.
Specs
- Miter slot fit: 3/8 x 3/4 inch T-slot
- Weight: 15.8 ounces
- Package dimensions: 7.76 x 3.82 x 2.01 inches
- Compatibility: table saw, band saw, router table
- Model number: FC-151
YLA STORE Thin Rip Jig
The YLA STORE thin rip jig is an aluminum guide sold as a complete jig guide set. Its listing highlights broad slot compatibility: it fits 3/4 inch T-slots, 3/4 inch U-slots and 3/8 inch T-slots, which covers most table saws, band saws and router tables without swapping miter bars. The body measures 8 by 2 by 0.5 inches and weighs 1.34 pounds, making it one of the longer and heavier guides in this roundup.
Like the GOINGMAKE, this jig is positioned for fast, repetitive narrow strip cuts, with the guide locked in the slot ahead of the blade and the fence moved to the workpiece for each pass. The longer body gives stock a longer bearing run before the cut. It is a budget-tier option for woodworkers whose saw has a U-slot that many T-slot-only jigs cannot use.
Specs
- Material: aluminum
- Miter slot fit: 3/4 inch T-slot, 3/4 inch U-slot, 3/8 inch T-slot
- Dimensions: 8 x 2 x 0.5 inches
- Weight: 1.34 pounds
- Included components: Thin Rip Jig Table Saw Jig Guide Set
- Manufacturer: Ar-MBJJ-01
How to choose a thin rip jig
Start with your miter slot, because it eliminates options fastest. Full-size cabinet and contractor saws almost always use a 3/4 by 3/8 inch slot, but the bar that locks into it may be a plain rectangle, a T-slot bar or a U-slot bar depending on the saw brand. Measure the slot and check its profile before ordering: the Peachtree 3096 targets the standard slot, the SakerPlus FC-151 is a T-slot design, and the GOINGMAKE and YLA STORE jigs cover T-slot and U-slot profiles plus, in the GOINGMAKE’s case, the smaller 1/4 by 3/8 inch slots on compact saws.
Next, look at adjustment range, which tells you the widest strip you can set without repositioning the jig mid-batch. The GOINGMAKE covers 2-5/8 to 8 inches from slot center to blade, spanning fine edging to wider lamination stock. If you only rip strips under an inch wide, a compact jig like the Peachtree or SakerPlus is enough; if widths vary, a longer sliding body such as the DDWT or YLA gives more travel and a longer reference surface.
Finally, consider the scale. Laser-engraved imperial and metric scales, as on the GOINGMAKE, let you dial a width directly from the jig. Simpler jigs are set against the blade teeth or with a setup block of known thickness, which is slower but repeatable once the fence is locked. Also check band saw and router table ratings if you plan to share the jig across machines.
Who should skip a thin rip jig
Skip a dedicated jig if you only rip one or two thin strips a year: a stop block clamped to the fence or a shop-made sled handles occasional cuts without another accessory to store. Woodworkers whose saws have non-standard miter slots matching none of the fitments above should look for a jig made for their specific saw instead. And if your thin stock work is mostly very short pieces, a push block system for small parts may suit you better, since these guides are designed around feeding longer boards past a fixed point in front of the blade.
FAQ
How does a thin rip jig work?
The jig locks into the miter slot to the left of the blade and sits a few inches in front of it. You slide it until its guide point is the strip width away from the blade, register the edge of your board against the point, then slide the rip fence up to the board and lock it. Each cut drops a strip of the same width on the left of the blade, and you repeat the fence move for the next strip.
Will these jigs fit a benchtop table saw?
It depends on the slot. Many benchtop saws use the standard 3/4 by 3/8 inch slot, but some use smaller or non-standard slots. The GOINGMAKE lists fitment down to 1/4 by 3/8 inch T-slots, while the Peachtree 3096 is made for the standard slot size only. Measure your slot’s width, depth and profile, then match it against the fitment in each jig’s specs.
Can I use a thin rip jig on a band saw or router table?
Several of these jigs are rated for that. The GOINGMAKE, DDWT, SakerPlus and YLA STORE listings all name band saws and router tables alongside table saws, and Peachtree states its jig works with many router tables and band saws. The requirement is the same: the machine needs a miter slot that matches the jig’s bar.
How thin a strip can these jigs cut?
The GOINGMAKE is maker-rated for strips as thin as 1/32 inch. In practice, the limit also depends on your blade, stock and push tools, and very thin strips are usually cut from the edge of a wider, stable board rather than by feeding narrow stock itself.
Final verdict
A thin rip jig removes the most awkward part of strip work: resetting the fence for every cut while a narrow offcut sits next to the blade. For a single pick, the GOINGMAKE GM8 offers the widest slot compatibility and range with engraved scales. The Peachtree 3096 remains the straightforward budget choice for standard slots, the DDWT Ultimate Version brings a longer sliding body for frequent ripping, and the SakerPlus FC-151 and YLA STORE jigs round out the budget tier for compact saws and U-slot machines. Match the bar to your slot first, and any of the five makes repeat thin strips a routine setup.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!