Updated Nov 20, 2026· 8 min read

Key takeaways

  • Compare the best spring clamps for woodworking and shop use, from steel Pony and Bessey clamps to budget multi-packs, with jaw sizes and buying tips.
⭐ Key Takeaways
Quick answer: Our top pick is PONY 6-inch Heavy Duty Spring Clamps Set, 6-Pack, with BESSEY XM5 2-Inch Metal Spring Clamp as a strong alternative.

Spring clamps are the extra hands every workshop reaches for. They go on in one squeeze, hold edge banding, drop cloths, templates and small parts without any setup, and come off just as fast when the glue sets. Because they are cheap enough to buy in multiples, most woodworkers own a drawer full of them in several sizes.

Not all spring clamps are equal, though. Steel models bite harder and last for decades, resin and nylon models are lighter and kinder to finished surfaces, and jaw opening matters more than overall length when you are clamping thicker stock. This guide compares five well-regarded options, from a single premium steel clamp to a twenty-piece budget set, so you can match the clamp to the work you actually do.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most woodworkers, the PONY 6-inch Heavy Duty Spring Clamps 6-Pack is the best starting point: nickel-plated steel jaws, a maker-rated 44 lb of holding force and protected tips in a useful 2-inch size. The BESSEY XM5 is the strongest single-clamp pick, the IRWIN 58200 suits light resin duty, and the Amazon Basics 20-piece set covers small work on a budget.

PONY 6-inch Heavy Duty Spring Clamps Set, 6-Pack

PONY 6-inch Heavy Duty Spring Clamps Set, 6-Pack

PONY 6-inch Heavy Duty Spring Clamps Set, 6-Pack

Check price on Amazon

Pony Jorgensen is the name most woodworkers associate with spring clamps, and this six-pack of its 6-inch heavy duty model shows why. Each clamp is built from nickel-plated steel with a tempered steel spring, and the maker rates the holding force at 44 lb, which is strong for a clamp in this size class. The 2-inch jaw opening handles edge banding, face frames and doubled-up sheet goods without straining.

Protected rubber handles and tips come fitted as standard, so the jaws are less likely to dent softwood or leave marks on pre-finished parts. Because the set includes six identical clamps, it suits the way spring clamps are actually used: in groups, pinning a long edge or holding a template at several points at once. This is a mid-range set that should outlast several project cycles.

Specs:
– Brand: PONY (Pony Jorgensen)
– Jaw opening: 2 inches
– Clamp length: 6 inches
– Body material: nickel-plated steel
– Maker-rated holding force: 44 lb
– Handles and tips: protected rubber coating
– Pack size: 6 clamps

BESSEY XM5 2-Inch Metal Spring Clamp

BESSEY XM5 2-Inch Metal Spring Clamp

BESSEY XM5 2-Inch Metal Spring Clamp

Check price on Amazon

The BESSEY XM5 is the traditional single steel spring clamp, sold individually so you can build exactly the count you need. It is made from nickel-plated steel with vinyl-coated handles and jaw tips, and its 2-inch jaw opening pairs with a 2-inch throat depth, which lets it reach further onto a panel than shorter clamps of the same capacity. At 6 inches overall it is easy to park on a tool belt or apron pocket.

Bessey lists a tensile strength figure of 33 lb for this model, and the heavy spring gives it a firm, positive bite on trim, stops and small assemblies. The vinyl tips protect workpieces and can be replaced when they wear. Woodworkers who prefer to buy a few high-quality clamps rather than a bulk set will find the XM5 the premium-feeling option here, and it is the natural choice for a buy-it-for-life clamp drawer.

Specs:
– Brand: BESSEY
– Model: XM5 (XM-5)
– Jaw opening: 2 inches
– Throat depth: 2 inches
– Overall length: 6 inches
– Body material: nickel-plated steel with vinyl-coated handles and tips
– Listed tensile strength: 33 lb
– Pack size: sold individually

IRWIN QUICK-GRIP Resin Spring Clamp, 2-Inch (58200)

IRWIN QUICK-GRIP Resin Spring Clamp, 2-Inch (58200)

IRWIN QUICK-GRIP Resin Spring Clamp, 2-Inch (58200)

Check price on Amazon

The IRWIN 58200 takes a different approach: instead of steel, the body is molded resin, which makes the clamp light, rust-proof and safe around finished surfaces and damp work areas. The 2-inch jaw opening matches the steel clamps above, so it covers the same everyday tasks, holding tarps, sheet material and small parts while glue or fasteners are applied.

Resin gives up some clamping force compared with a steel spring clamp, so this is a light-duty pick rather than a glue-up workhorse. In return you get a clamp that will not corrode in a damp shop, will not spark, and is gentle on delicate stock. It is sold as a single clamp in Irwin’s familiar blue, and it makes a sensible budget-friendly addition for occasional use, craft work and site tasks where a steel clamp would be overkill.

Specs:
– Brand: IRWIN
– Model: 58200
– Jaw opening: 2 inches
– Body material: resin
– Color: blue
– Pack size: sold individually

HORUSDY 6-Piece 6-Inch Spring Clamps, Metal

HORUSDY 6-Piece 6-Inch Spring Clamps, Metal

HORUSDY 6-Piece 6-Inch Spring Clamps, Metal

Check price on Amazon

HORUSDY’s six-piece set is the value pick among the steel clamps in this guide. The clamps are 6 inches long with a wider 2.5-inch jaw opening, and the maker states the spring clips are nickel-plated steel for rust resistance. That extra half inch of capacity is genuinely useful: it lets the clamps swallow thicker laminated stock, doubled plywood edges and small cauls that a 2-inch clamp cannot reach around.

The handles are finished in orange, which makes the clamps easy to spot in a busy shop or on a job site. As a six-piece set at a budget tier, it is aimed at woodworkers who want several strong clamps for glue-ups and holding work without paying per-clamp prices for premium brands. Model number 97867C identifies the set if you want to add more of the same later.

Specs:
– Brand: HORUSDY
– Model: 97867C
– Jaw opening: 2.5 inches
– Clamp length: 6 inches
– Body material: alloy steel, nickel-plated spring clips
– Pack size: 6 clamps

Amazon Basics 20-Piece Steel Spring Clamp Set

Amazon Basics 20-Piece Steel Spring Clamp Set

Amazon Basics 20-Piece Steel Spring Clamp Set

Check price on Amazon

The Amazon Basics 20-piece set is built for quantity. It mixes fifteen clamps with a 3/4-inch jaw opening and five with a 1-inch jaw opening, which makes it a small-parts specialist: model work, crafts, holding stop blocks, pinning veneer and keeping glue squeeze-out paper in place. The clamps are zinc-coated steel, which Amazon describes as non-corroding, with tempered steel springs for a firm close.

Non-marking PVC-coated tips protect surfaces, and PVC-coated handles give a non-slip grip when your hands are dusty. These are small clamps, so they will not replace 2-inch models for general shop work, but as a budget-tier way to fill a clamp drawer with light-duty helpers they are hard to beat. The set is identified by model number ABL004.

Specs:
– Brand: Amazon Basics
– Model: ABL004
– Jaw openings: 3/4 inch (15 clamps) and 1 inch (5 clamps)
– Body material: zinc-coated steel
– Tips and handles: PVC-coated, non-marking tips
– Pack size: 20 clamps

How to choose

Start with jaw opening, because it decides what the clamp can actually hold. A 2-inch opening covers most furniture-scale work, edge banding and small assemblies. Step up to a 2.5-inch model if you clamp laminated or doubled stock, and keep a handful of sub-1-inch clamps for models, crafts and tight spots.

Next, pick a body material. Steel clamps such as the Pony, Bessey and HORUSDY sets deliver the strongest bite and the longest service life, and nickel or zinc coatings slow down rust. Resin and nylon clamps are lighter and will not corrode or mar finishes as easily, but they trade away clamping force, so treat them as light-duty helpers rather than glue-up clamps.

Finally, think in sets. Spring clamps are almost always used in multiples, three or four along an edge, so a matched multi-pack is usually better value than the same money spent on singles. Check that the tips are coated or padded if you clamp finished surfaces, and favor strong springs you can still open one-handed without a fight, since a clamp that is tiring to squeeze will simply stay in the drawer.

Who should skip these

Skip spring clamps entirely if your main work is panel glue-ups, cabinet carcasses or anything that needs sustained, evenly distributed pressure. Spring clamps cannot match the clamping force of bar, parallel or pipe clamps, and using them as your only glue-up clamps risks starved, weak joints. They are holding tools, not pressing tools.

Also skip the small budget sets if you mostly clamp thick stock: a 3/4-inch jaw is useless on a doubled worktop edge. And if you work with polished or lacquered surfaces all day, skip uncoated steel models and choose padded or resin clamps instead, or plan to add protective pads before the steel jaws touch the finish.

FAQ

How many spring clamps should a woodworker own?

A dozen is a practical starting point: six mid-size 2-inch clamps for general work, plus a mix of smaller and larger sizes. Glue-ups and edge banding consume clamps quickly, and spring clamps are inexpensive enough that running short mid-task is the bigger problem.

Are steel or plastic spring clamps better?

Steel clamps bite harder and last longer, which makes them the better default for woodworking. Resin and nylon clamps are lighter, rust-proof and gentler on finishes, so they earn their place for light holding, craft work and damp environments. Many shops keep both.

What jaw opening do I need for edge banding?

A 2-inch opening handles most edge banding on standard sheet goods and solid lippings. If you band doubled panels or use thick cauls to spread pressure, choose a 2.5-inch model so the clamp seats fully instead of perching on the edge.

Can spring clamps damage wood?

They can dent softwood and leave marks on finished surfaces if the jaws are bare steel. Choosing clamps with coated or padded tips, like the Pony, Bessey and Amazon Basics models above, reduces the risk, and a scrap of tape or thin card under the jaw adds cheap insurance.

Final verdict

The PONY 6-inch Heavy Duty 6-Pack is the set to buy first: strong steel construction, a useful 2-inch jaw and protected tips in a matched group of six. Add the BESSEY XM5 when you want the best single clamp, the HORUSDY set when you need a wider 2.5-inch bite on a budget, and the Amazon Basics 20-piece set to cover small work. Keep the IRWIN 58200 in mind for light, rust-free holding where steel is more clamp than the job needs.

T
Table Saw Blog Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Spring Clamps for Woodworking, Glue-Ups and RepairsCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.