Key takeaways
- Compare five impact drivers for woodworking, from compact 12-volt-class tools to full-power 18-volt models, and pick the right driver for your shop.
An impact driver is the tool that makes long screws feel easy. A drill driver spins a screw in with steady torque, and when the screw bites into dense hardwood the motor strains, the bit cams out, and the screw head strips. An impact driver adds a hammering action that taps the bit forward in tiny pulses, so the bit stays seated while the screw keeps turning.
Every pick in this guide runs on a cordless battery platform, uses a 1/4-inch hex chuck, and is built for the fastening a woodworker does every day: assembling cabinets, fastening face frames, and driving long screws into studs. They differ in torque, size, and speed settings, so the right one depends on the batteries you already own and the work you do most.
As an Amazon Associate, I earn from qualifying purchases.
How to Choose an Impact Driver
Start with the battery platform you already own. A bare tool is the cheapest way onto a platform you have invested in. All five drivers here are 18-volt or 20-volt class tools, the sweet spot for woodworking: enough torque for 3-inch screws and lag bolts, without the bulk of a high-torque wrench.
Torque is the headline number, and for woodworking anything from 1,500 to 2,200 inch-pounds covers almost every job. More torque helps with long lag bolts and dense hardwoods, but it also makes it easier to snap a small screw. That is why speed settings matter more than the torque number alone: a driver with two or three speeds, or a self-tapping mode that slows the tool as the screw seats, lets you drive a short brass screw into a hinge without snapping it.
Length and weight matter when you work inside a cabinet or drive screws overhead. Compact drivers around 4.5 to 5.5 inches long reach into corners a longer tool cannot, and a lighter tool is easier on the wrist.
Finally, remember what an impact driver is not. It drives screws, bolts, and nuts. It does not drill clean holes: a twist bit or a spade bit in a hex chuck will wander, and the hammering action makes clean holes worse, not better. Keep a drill driver beside it for boring.
Comparison
| Driver | Voltage | Max Torque | Speeds | Batteries Included |
|---|---|---|---|---|
| DEWALT DCF887B | 20V MAX | 1,825 in-lbs | 3 | No, bare tool |
| Milwaukee M18 FUEL 2953-20 | 18V | 2,000 in-lbs | 4 | No, bare tool |
| Makita XDT13Z | 18V LXT | 1,500 in-lbs | 1 | No, bare tool |
| Bosch GDX18V-1800B12 | 18V | 1,800 in-lbs | 1 | Yes, one 2.0Ah |
| Ryobi PBLID01B | 18V ONE+ HP | 2,200 in-lbs | 4 | No, bare tool |
1. DEWALT DCF887B 20V MAX XR Impact Driver
The DCF887B is the long-running workhorse of the DEWALT 20-volt line. Its brushless motor delivers up to 1,825 inch-pounds of torque, and three speed settings let you drop to a gentle pace for small screws or open it up for long deck screws. A PrecisionTap mode slows the driver as the screw seats.
At 5.3 inches long it fits between studs and inside cabinet boxes, and three LED lights ring the chuck. It is a bare tool, so it makes sense only if you already own DEWALT 20V MAX batteries.
Specs
- Voltage: 20V MAX
- Max torque: 1,825 in-lbs
- Max speed: 3,250 RPM, 3,600 IPM
- Speed settings: 3, plus PrecisionTap mode
- Length: 5.3 in
- Chuck: 1/4 in hex, quick release
- Motor: Brushless
- Batteries included: None, bare tool
2. Milwaukee M18 FUEL 2953-20 Impact Driver
The Milwaukee 2953-20 is the compact powerhouse of this group. Its POWERSTATE brushless motor puts out up to 2,000 inch-pounds of torque in a body only 4.47 inches long, the shortest driver here, which makes it the easiest to maneuver inside a cabinet or between joists. Four drive modes include a self-tapping mode that cuts power as the screw seats.
The tri-LED work light is brighter than a single LED, and the tool pairs with the full M18 battery range. It is a bare tool, so budget for a battery if you are not already on the M18 platform.
Specs
- Voltage: 18V M18 FUEL
- Max torque: 2,000 in-lbs
- Max speed: 3,900 RPM, 4,400 IPM
- Speed settings: 4 drive modes
- Length: 4.47 in
- Chuck: 1/4 in hex, quick release
- Motor: POWERSTATE brushless
- Batteries included: None, bare tool
3. Makita XDT13Z 18V LXT Impact Driver
The Makita XDT13Z is the quiet achiever of this guide. It delivers 1,500 inch-pounds of torque, the lowest number here, yet it handles the screws a woodworker drives most often with ease: cabinet screws, face-frame screws, and hardware screws up to 3 inches long. Its brushless motor and compact 5-3/8-inch body make it light and easy to control, and the single speed with a variable trigger keeps the operation simple.
That simplicity is also its limit. With one speed setting and no dedicated seating mode, you control depth with the trigger alone, which takes a steadier hand on delicate work such as brass hinge screws. It is a bare tool on the 18V LXT platform, so it suits a shop that already runs Makita tools.
Specs
- Voltage: 18V LXT
- Max torque: 1,500 in-lbs
- Max speed: 3,400 RPM, 3,600 IPM
- Speed settings: 1, variable trigger
- Length: 5.375 in
- Chuck: 1/4 in hex, quick release
- Motor: Brushless
- Batteries included: None, bare tool
4. Bosch GDX18V-1800B12 Two-in-One Impact Driver Kit
The Bosch GDX18V-1800B12 is the only kit in this guide and the only driver with a dual chuck. It accepts both 1/4-inch hex bits and 1/2-inch square sockets, so one tool drives screws and tightens lag bolts and hex nuts without an adapter. Its EC brushless motor delivers up to 1,800 inch-pounds of torque, and the kit includes a 2.0Ah battery, a charger, and a storage bag.
The dual chuck adds a little length and weight compared with a hex-only driver, and with one speed setting you rely on the variable trigger for control. That trade is worth it for a woodworker who also assembles workbenches or drives lag bolts, because the socket drive removes the wobble an adapter adds.
Specs
- Voltage: 18V
- Max torque: 1,800 in-lbs
- Max speed: 3,400 RPM, 4,200 IPM
- Speed settings: 1, variable trigger
- Chuck: 1/4 in hex and 1/2 in square, two-in-one
- Motor: EC brushless
- Batteries included: Yes, one 2.0Ah battery and charger
5. Ryobi PBLID01B ONE+ HP Impact Driver
The Ryobi PBLID01B is the torque leader of this guide at 2,200 inch-pounds, on the ONE+ HP platform many home shops already own. Four modes, including a self-tapping mode and an assist mode that starts a screw slowly, give you more control than the torque number suggests.
It is a bare tool, so it is a bargain only if you already own ONE+ batteries, and the extra torque means you should use the lower modes for small screws. For a home shop that drives long deck screws and builds fences, it is hard to beat on power per dollar.
Specs
- Voltage: 18V ONE+ HP
- Max torque: 2,200 in-lbs
- Max speed: 2,900 RPM, 3,800 IPM
- Speed settings: 4 modes, including assist mode
- Chuck: 1/4 in hex, quick release
- Motor: Brushless
- Batteries included: None, bare tool
Which Impact Driver Should You Pick
If you already own batteries, buy the bare tool on your platform. DEWALT owners should take the DCF887B for its three speeds. Milwaukee owners should take the 2953-20 for its compact body and high torque. Makita owners who drive mostly cabinet screws will be happy with the XDT13Z, and Ryobi owners get the most torque in this guide from the PBLID01B.
If you are starting fresh, the Bosch GDX18V-1800B12 kit is the smartest first buy, because it includes a battery and charger and its dual chuck handles screws and lag bolts. If your work is mostly tight cabinet interiors, pick the shortest tool you can: the Milwaukee 2953-20. If you drive long screws into decks and fences all day, pick the highest torque: the Ryobi PBLID01B.
FAQ
Can an impact driver replace my drill?
No. An impact driver drives screws better than a drill does, but a drill bores clean holes and drives screws at low speed with a clutch. Keep both on the bench: drill the hole, then drive the screw with the impact driver.
Will an impact driver snap small screws?
It can, if you run it at full speed on a short screw. Use the lowest speed setting, a self-tapping mode if your driver has one, or a gentle trigger squeeze for brass screws.
Do I need a battery and charger with a bare tool?
Yes, unless you already own batteries on the same platform. Four of the five drivers here are sold as bare tools, so check your battery shelf before you buy.
What size screws can an 18-volt impact driver handle?
For woodworking, an 18-volt or 20-volt impact driver handles screws up to about 3 inches long, plus lag bolts up to about 3/8 inch with a socket adapter. Longer fasteners belong to a larger impact wrench.
Conclusion
An impact driver earns its place on the bench the first time it sinks a 3-inch screw into oak without stripping the head. The DEWALT DCF887B is the safe all-rounder for DEWALT shops, the Milwaukee 2953-20 is the most compact and powerful pro pick, the Makita XDT13Z is the light and simple choice for cabinet work, the Bosch GDX18V-1800B12 is the best starter kit, and the Ryobi PBLID01B brings the most torque to a home shop. Match the driver to the batteries you own, and keep a drill beside it for clean holes.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!