Updated Nov 21, 2026· 7 min read

Key takeaways

  • Compare the best small parts organizers for woodworking, from 64-drawer cabinets to portable cases, and keep screws, dowels, and hinges sorted.

A wood shop runs on small hardware. Screws, dowels, hinges, brads, washers, and plugs pile up fast, and once they mix together in a coffee can, every project starts with a hunt. A good small parts organizer ends that hunt. It gives every fastener a labeled home, keeps dust out, and lets you see what you have before you start cutting.

Our top pick: Akro-Mils 10164 64-Drawer Storage Cabinet. Runner-up: DEWALT DWST14825 Deep Pro Organizer.

As an Amazon Associate, I earn from qualifying purchases.

How to Choose a Small Parts Organizer

Start with where the organizer will live. A bench cabinet stays put and holds the most hardware, while a portable case goes with you to an install or a job site. If you have wall space above a bench, a tilt-out bin unit keeps parts at eye level without taking up bench space. Measure the spot first, because a cabinet that does not fit the bench ends up on the floor.

Count your compartments before you buy. A shop that stocks a dozen screw sizes plus dowels, hinges, and plugs needs far more compartments than a shop that keeps three sizes of pocket screws. More compartments mean finer sorting, but each compartment gets smaller. Small drawers suit screws and brads; larger bins suit hinges and dowel packs.

Look at how the dividers work. Removable and adjustable dividers let you resize compartments as your stock changes. Fixed dividers are sturdier and keep parts from migrating when the case gets knocked around. For portable cases, a lid that latches firmly and dividers that reach the lid keep a mixed load from becoming a mixed mess.

Check the material and the latch. High-impact polystyrene and heavy polypropylene hold up to years of bench use, and a clear lid or clear drawers let you spot the right compartment without opening every one. A metal latch outlasts a plastic snap on a case that gets carried often. Closed drawers and lids that seal also keep fine dust out of your hardware.

Comparison Table

Organizer Type Compartments Best For
Akro-Mils 10164 Drawer cabinet 64 drawers Large hardware collections
DEWALT DWST14825 Deep organizer case 10 compartments Bulky hardware and job-site carry
CRAFTSMAN CMST60964M Compartment cases, 3-pack 10 per case Sorting by project or fastener type
Akro-Mils 05905 Portable parts case 18 compartments Bench-to-job portability
Akro-Mils TiltView 6705 Tilt-out bin unit 5 bins Eye-level bench storage

The 5 Best Small Parts Organizers for Woodworking

1. Akro-Mils 10164 64-Drawer Storage Cabinet

The Akro-Mils 10164 is the classic bench cabinet for a shop with a serious hardware collection. Sixty-four drawers give you room to sort screws by size and length, keep dowels and plugs separate from hinges, and still have drawers left for brads and washers. The cabinet is made in the USA from rugged, high-impact polystyrene, and it arrives ready to use with no assembly required.

Each drawer has a clear front, so you can see the contents at a glance, and the included dividers let you split drawers for finer sorting. The cabinet stacks securely with matching units and can also be wall mounted with keyhole slots, which frees up bench space when the collection grows.

  • Specs:
  • 64 drawers with clear fronts and included dividers
  • Overall size: 20 inches wide x 6 inches deep x 16 inches high
  • Drawer inside dimensions: 5-1/4 inches x 1-11/16 inches x 1-1/2 inches
  • High-impact polystyrene construction, made in the USA
  • Stacks securely and wall-mounts with keyhole slots
  • No assembly required

2. DEWALT DWST14825 Deep Pro Organizer

The DEWALT DWST14825 is built for hardware that does not fit in a shallow case. Its deep compartments hold larger items such as hinges, brackets, dowel packs, and bulk fasteners, and the removable dividers let you open up space for a bigger part or split a compartment for two smaller ones. The metal latch closes with a solid snap, which matters when the case rides in a truck or gets carried across a job site.

  • Specs:
  • 10 compartments with removable dividers
  • Deep profile for hinges, brackets, and bulk fasteners
  • Metal latch for secure closure
  • Model number DWST14825
  • Portable case format for bench-to-job carry

3. CRAFTSMAN CMST60964M 3-Pack Storage Organizers

The CRAFTSMAN CMST60964M comes as a set of three identical organizers, and that is the point. Instead of one big case, you get three cases you can dedicate to different jobs: one for screws, one for dowels and plugs, and one for hinges and cabinet hardware. Each case has ten compartments with removable dividers, and the lid includes a secure latch that keeps contents in place when the case is carried.

  • Specs:
  • Set of 3 organizers, 10 compartments per case
  • Removable dividers for custom compartment sizes
  • Lid with secure latch
  • Plastic construction
  • Model number CMST60964M

4. Akro-Mils 05905 Portable Parts Storage Case

The Akro-Mils 05905 is a large, clear, portable case that bridges the gap between a bench cabinet and a pocket-sized box. It measures 14-3/8 inches long by 9-1/2 inches wide by 2-1/2 inches deep, with five front-to-back adjustable dividers that create up to 18 compartments. That layout suits a mixed load of screws, nuts, bolts, and small hardware for a single project or a day of installs.

The hinged lid opens wide and the clear body makes the contents visible from the bench or the shelf. The case is water repellent and light at just over a pound empty, so it carries easily, and the dividers adjust as your stock changes.

  • Specs:
  • 18 compartments with 5 adjustable dividers
  • Size: 14-3/8 inches x 9-1/2 inches x 2-1/2 inches
  • Clear plastic body with hinged lid
  • Water repellent construction
  • Item weight: 1.06 pounds
  • Model number 5905

5. Akro-Mils TiltView 6705 5-Bin Storage Unit

The Akro-Mils TiltView 6705 takes a different approach: five tilt-out bins in a horizontal unit that sits on a bench or mounts to a wall. Each bin tilts open smoothly for easy access and closes securely to keep dust out, and the removable crystal-clear bin cups let you see the contents and lift a bin out for refilling or cleaning. Card stock labels come with the unit so every bin can be marked.

At 23-5/8 inches wide and 6-1/2 inches high, the unit fits above a workbench or on a shelf, and all TiltView units share the same width, so they stack neatly as the collection grows. Each bin holds up to 2 pounds, which suits hinges, dowel packs, and the fasteners you reach for most often.

  • Specs:
  • 5 tilt-out bins with removable clear bin cups
  • Size: 23-5/8 inches wide x 6-1/2 inches high x 5-5/8 inches deep
  • Bin capacity: 2 pounds per bin
  • High-impact polystyrene cabinet, clear polystyrene bins
  • Includes card stock labels for bin contents
  • Stacks with matching TiltView units; mounts to rails or louvered panels
  • Item weight: 4.8 pounds
  • Model number 6705

Which Small Parts Organizer Should You Pick

If your shop has a large, settled hardware collection, start with the Akro-Mils 10164. Sixty-four drawers give you the finest sorting in this guide, and the cabinet grows by stacking or wall mounting. Pair it with the DEWALT DWST14825 for bulky items that do not belong in small drawers, such as hinges and brackets.

If you carry hardware to jobs, pick the Akro-Mils 05905 or the CRAFTSMAN 3-pack. The 05905 is the better single case for a mixed daily load, while the three-pack lets you sort by project or fastener type and grab only the case a job needs.

If your bench is crowded and you reach for the same fasteners every day, the Akro-Mils TiltView 6705 is the answer. Its tilt-out bins put your most-used hardware at eye level without taking up bench space.

Frequently Asked Questions

How many compartments do I need in a small parts organizer?

It depends on how many fastener types you stock. A shop with a few screw sizes can manage with ten compartments, while a shop that keeps screws by size and length plus dowels, hinges, and plugs will use forty or more. Start by listing the hardware you actually keep, then add room for growth.

Are drawer cabinets or portable cases better for a wood shop?

They serve different jobs. A drawer cabinet is better for a large collection that stays at the bench, because it holds more and keeps everything visible. A portable case is better for hardware that travels to installs or moves between workstations. Many shops use both: a cabinet for the main stock and cases for project kits.

Can small parts organizers keep dust out of hardware?

Closed drawers, lids, and tilt-out bins that close securely all help. Fine sawdust still finds its way in over time, so keep organizers away from the direct path of a saw when possible, and wipe out compartments when you restock.

What is the best way to label a small parts organizer?

Use the labels that come with the organizer, or a label maker, and mark both the fastener type and the size. A drawer labeled with the screw size and length saves far more time than one labeled only with a general name.

Conclusion

A small parts organizer is one of the cheapest upgrades a wood shop can make, and it pays for itself in time saved. The Akro-Mils 10164 handles a large bench collection, the DEWALT DWST14825 takes the bulky hardware, the CRAFTSMAN 3-pack sorts by project, the Akro-Mils 05905 travels to the job, and the TiltView 6705 keeps daily-use parts at eye level. Pick the format that matches your shop, sort by size and type, and label every compartment.

T
Table Saw Blog Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Small Parts Organizers for Woodworking: 5 PicksCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.