Updated Nov 20, 2026· 8 min read

Key takeaways

  • Compare the best dovetail jigs for through and half-blind joints, with board capacities, template types and included bits for every router setup.
⭐ Key Takeaways
Quick answer: Our top pick is PORTER-CABLE 4216 Super Jig Dovetail Jig, with Leigh D4R Pro 24-Inch Dovetail Jig as a strong alternative.

A dovetail jig lets a router cut the interlocking pins and tails that make drawers, boxes and casework strong without glue alone carrying the load. The market splits into two families: fixed-template jigs that clamp both boards and rout both halves of the joint in one pass, and adjustable-finger systems that let you vary pin spacing for a hand-cut look. This guide compares five current models across both families, from a portable budget template to a 24-inch professional system.

Every pick below is described from published specifications only: board width capacity, stock thickness range, joint types, template style, and the bits and guide bushings included in the box. Picks are grouped into budget, mid-range and premium tiers rather than ranked by price claims, so you can match the jig to the width of work you actually build and the joints you cut most often.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

The PORTER-CABLE 4216 is the most complete fixed-template kit, covering half-blind, through, sliding and miniature joints with three templates. The Leigh D4R Pro is the premium choice for wide boards and variable spacing. The PORTER-CABLE 4212 covers the core drawer joints, the POWERTEC 71529 suits router-table through dovetails, and the General Tools 861 is the portable budget pick.

PORTER-CABLE 4216 Super Jig Dovetail Jig

PORTER-CABLE 4216 Super Jig Dovetail Jig

PORTER-CABLE 4216 Super Jig Dovetail Jig

Check price on Amazon

The 4216 is the fullest version of Porter-Cable’s long-running 12-inch jig line, and it sits in the mid-range tier. Its one-piece steel base clamps or bolts to the bench, cam-action clamps hold both boards at once, and machined aluminum templates guide the router so pins and tails are cut in a single setup. Template alignment lines and router bit depth gauges are built in to speed up repeatable setups.

Three templates come in the box. The 4211 template cuts half-blind, rabbeted half-blind and sliding dovetails, the 4213 template cuts through dovetails and box joints, and the 4215 template handles miniature through dovetails, miniature box joints and miniature half-blind joints for small boxes and drawers. Four router bits and four template guides are included, so the kit is ready for every listed joint type with a compatible router.

Specs

  • Board capacity: up to 12 inches wide
  • Stock thickness: 1/4 inch to 1-1/8 inches
  • Templates included: 4211, 4213 and 4215 aluminum templates
  • Joint types: half-blind, rabbeted half-blind, sliding, through, box joints and miniature joints
  • Bits and guides: 4 router bits and 4 template guides included
  • Base: one-piece steel base with cam-action clamps
  • Setup aids: template alignment lines and router bit depth gauges
  • Warranty: 3-year limited warranty

Leigh D4R Pro 24-Inch Dovetail Jig

Leigh D4R Pro 24-Inch Dovetail Jig

Leigh D4R Pro 24-Inch Dovetail Jig

Check price on Amazon

The D4R Pro is the premium entry here and the only adjustable-finger jig in this roundup. Instead of a fixed comb template, its guide fingers slide independently along a one-piece aluminum extrusion base, so pin and tail spacing can be varied across the board for a layout that looks hand-cut rather than machine-spaced. That flexibility, plus the 24-inch capacity, makes it the natural pick for wide casework panels and blanket chests.

Leigh publishes a maximum pin board thickness of 1-1/4 inches, and the jig cuts through dovetails, half-blind dovetails, rabbeted half-blind dovetails, sliding dovetails, asymmetrical dovetails and box joints. Three carbide router bits are included, along with a guide bushing system matched to the finger guides. The trade-off for the flexibility is setup time: finger positions are set board by board, so it rewards careful layout work.

Specs

  • Board capacity: up to 24 inches wide
  • Maximum pin board thickness: 1-1/4 inches
  • Base: one-piece aluminum extrusion
  • Template type: individually adjustable guide fingers for variable spacing
  • Joint types: through, half-blind, rabbeted half-blind, sliding and asymmetrical dovetails, plus box joints
  • Bits included: 3 carbide router bits
  • Warranty: 5-year warranty with a 90-day money-back guarantee

PORTER-CABLE 4212 12-Inch Deluxe Dovetail Jig

PORTER-CABLE 4212 12-Inch Deluxe Dovetail Jig

PORTER-CABLE 4212 12-Inch Deluxe Dovetail Jig

Check price on Amazon

The 4212 shares the 4216’s steel base, cam clamps and 12-inch capacity but trims the kit to the two templates most drawer and box work needs, keeping it in the mid-range tier. The 4211 template handles half-blind, rabbeted half-blind and sliding dovetails, while the 4213 template covers through dovetails and box joints. For shops that never cut miniature joints, it gives up little to the larger kit.

The heavy-duty cam-type clamps use sandpaper-backed locking bars to grip stock from 1/4 inch to 1-1/8 inches thick, and the single-piece base needs no assembly before it is clamped or bolted to the bench. Machined aluminum templates, on-board instructions and a router bit depth gauge round out a package aimed at repeatable drawer production.

Specs

  • Board capacity: up to 12 inches wide
  • Stock thickness: 1/4 inch to 1-1/8 inches
  • Templates included: 4211 and 4213 machined aluminum templates
  • Joint types: half-blind, rabbeted half-blind, sliding, through and box joints
  • Bits included: 43776PC and 43743PC router bits
  • Guides included: 42040 and 42046 template guides, two lock nuts and a wrench
  • Base: single-piece steel base with cam-type clamps
  • Warranty: 3-year limited warranty with 1-year free service contract

POWERTEC 71529 15-Inch Dovetail Jig System

Check price on Amazon

The POWERTEC 71529 takes a different approach: it is a template system rather than a clamping jig, and it sits in the budget tier. A 15-inch precision-milled phenolic template is screwed down to a backing block or router table setup, and the router follows the template fingers to cut through dovetails at any width the template covers. Because there is no fixed frame, joint width is limited by your stock and backing setup rather than by a jig body.

POWERTEC lists acute, classic, compound-angled, curved, obtuse, box, drawer and knuckle joints among the cuts the system supports, used with either a handheld router or a router table. With the supplied bits it cuts dovetails in stock from 1/2 inch to 3/4 inch thick, which suits small and mid-sized boxes, drawers and cabinets. It is light and compact, so it stores easily in small shops.

Specs

  • Template: 15-inch precision-milled phenolic template guide
  • Bits included: 1 straight edge router bit and 1 7-degree dovetail bit
  • Hardware included: mounting screws and washers
  • Joint types: through dovetails plus acute, classic, compound-angled, curved, obtuse, box, drawer and knuckle joints
  • Stock thickness with supplied bits: 1/2 inch to 3/4 inch
  • Use: handheld router or router table
  • Item weight: 1.6 pounds

General Tools 861 EZ Pro Dovetail Jig

General Tools 861 EZ Pro Dovetail Jig

General Tools 861 EZ Pro Dovetail Jig

Check price on Amazon

The 861 is the budget, portable option in this group. It is a one-piece aluminum template jig that clamps directly onto the workpiece with integrated clamps, so there is no base to bolt to the bench and no assembly before the first cut. At under three pounds it is easy to move between bench, router table and job site, and its self-aligning design keeps both ends of the joint matched.

General Tools lists half-blind, through, edge-to-edge and square joints among the joint types it produces, and the kit includes a 14-degree, 1/2-inch dovetail router bit for use with a handheld router or router table. The single fixed template is the limitation: spacing is set by the template, and the included bit is the only cutter in the box, so it suits straightforward drawer and box work rather than varied joinery.

Specs

  • Template: one-piece aluminum body, 12-inch template
  • Item weight: 2.94 pounds
  • Bit included: 14-degree, 1/2-inch dovetail router bit
  • Joint types: half-blind, through, edge-to-edge and square joints
  • Clamping: integrated clamps with a self-aligning design, no bench bolting required
  • Use: handheld router or router table
  • Model: 861 EZ Pro Dovetail Jig Kit

How to choose a dovetail jig

Start with board width. Measure the widest drawer side, box panel or case side you plan to dovetail and match it to the jig’s published capacity: 12-inch jigs cover most drawer work, while wide casework pushes you toward a 24-inch system. Next, check the stock thickness range, because a jig that tops out below your drawer stock thickness is useless no matter how good its templates are.

Then match joint types to your projects. Half-blind dovetails are the standard drawer-front joint, through dovetails suit casework and boxes, and box joints need a template or finger setup rated for them. Fixed-template jigs cut both boards in one clamping and are faster for batches of identical drawers, while adjustable-finger jigs trade setup time for variable spacing. Finally, confirm what is in the box: the right dovetail and straight bits, the correct template guide bushing for your router, and any lock nuts or wrenches, since missing guides are the most common reason a new jig sits unused.

Who should skip a dovetail jig

Skip these jigs if you cut dovetails only once or twice a year on small boxes, where a marking gauge, a dovetail saw and practice will cost less bench space. Also skip fixed-template models if the evenly spaced, machine-made look bothers you and you are not ready to step up to an adjustable-finger system. Woodworkers who need joints wider than 24 inches, or who regularly dovetail stock thicker than the published maximums, should look at router-table sled methods or hand cutting instead. And if your router lacks a compatible template guide bushing fitting, budget for the correct guide before choosing any template jig.

FAQ

Can one jig cut both through and half-blind dovetails?

Yes, as long as it ships with templates for both joint types. The Porter-Cable kits pair a half-blind template with a through dovetail and box joint template, the Leigh D4R Pro handles both with its adjustable fingers, and the POWERTEC template system is built around through joints.

What router bits and guides does a dovetail jig need?

Each joint needs the matched dovetail bit and straight bit specified for its template, plus a template guide bushing that fits your router base and matches the template fingers. Kits differ: some include every bit and guide, while template-only systems include just the bits listed, so check the included components before ordering.

How thick can the stock be?

Published ranges vary by model. The Porter-Cable 12-inch jigs accept stock from 1/4 inch to 1-1/8 inches thick, the Leigh D4R Pro allows pin boards up to 1-1/4 inches thick, and the POWERTEC system cuts dovetails in 1/2-inch to 3/4-inch stock with its supplied bits.

Are fixed-template jigs better than adjustable-finger jigs?

Neither is better for everyone. Fixed templates are faster for repeated drawers because both boards are clamped and cut together with no layout decisions. Adjustable fingers take longer to set but vary the spacing, which many furniture makers prefer for visible casework joints.

Final verdict

For most shops, the PORTER-CABLE 4216 is the safest buy: three templates, included bits and guides, and a rigid steel base cover nearly every drawer and box joint in the mid-range tier. Choose the Leigh D4R Pro if wide boards or variable spacing matter more than setup speed, the 4212 if you only need the core joints, the POWERTEC 71529 for flexible router-table through dovetails, and the General Tools 861 when portability and a budget tier matter most.

T
Table Saw Blog Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Dovetail Jigs: 5 Router Jigs for Clean…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.