Updated Nov 20, 2026· 9 min read

Our Top Picks

  1. DEWALT DWS520K 6-1/2-Inch TrackSaw Kit
    Check on Amazon
  2. Milwaukee M18 FUEL 2831-20 Plunge Track Saw
    Check on Amazon
⭐ Key Takeaways
Quick answer: Our top pick is Festool TSC 55 KEBI-F-Plus Cordless Plunge-Cut Track Saw, with Makita SP6000J1 Plunge Circular Saw Kit with 55-Inch Guide Rail as a strong alternative.

A track saw flips the usual table saw routine: instead of wrestling a full sheet of plywood across a stationary blade, you lay a guide rail on the sheet, set the saw on the rail, plunge the blade, and walk the cut. The rail’s splinter guard sits exactly on the cut line, so edges come off straight and clean enough for cabinet work, and the plunge action lets you start cuts in the middle of a panel for sink cutouts and floor openings.

The five saws below run from a budget corded plunge saw to a premium cordless flagship. The big differences are what the box actually contains — some kits include a rail, others are a bare saw — plus cutting depth, bevel range, and whether the saw ties you to a battery platform. Each pick is described from the maker’s published specifications, with the exact configuration its listing covers stated up front.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most workshops, the Makita SP6000J1 is the easiest track saw to start with because the 55-inch rail and case are in the box. DeWalt’s DWS520K suits buyers who want corded power and a riving knife, Milwaukee’s 2831-20 fits M18 owners, Festool’s TSC 55 is the premium cordless option, and WEN’s CT1065 is the budget pick.

Makita SP6000J1 Plunge Circular Saw Kit

This listing is the kit configuration: the SP6000J corded plunge saw, a 55-inch guide rail (194368-5), a 48-tooth blade, and a stackable tool case. That matters, because the same saw is also sold without the rail, and the rail is what turns it into a track saw on day one.

  • Specs
  • Motor: 12-amp corded, variable speed 2,000–5,200 RPM
  • Blade: 6-1/2 inch, 48-tooth carbide (included)
  • Cutting depth: 2-3/16 inches at 90 degrees, 1-9/16 inches at 45 degrees
  • Bevel range: −1 to 48 degrees, with positive stops at 22.5 and 45 degrees
  • Guide rail: 55-inch rail included in this kit
  • Weight: 9.9 lb (saw)
  • Tier: premium

Makita rates the motor with electronic speed control and a soft start, and the saw has a depth stop for a 2.2 mm scoring pass that helps prevent splintering on melamine and veneered plywood. The bevel range dips to −1 degree, which lets you undercut slightly for tight joints. Because the rail is in the box, the first project needs no second purchase; longer work can add Makita’s 118-inch rail or a connector for joining rails.

DEWALT DWS520K TrackSaw Kit

The DWS520K kit contains the DWS520 corded track saw, a 6-1/2-inch 48-tooth blade, a blade wrench, and a kit box. Note what is not in the box: the guide rail is sold separately (DeWalt’s 59-inch DWS5022 is the standard match), so the real starting setup is this kit plus a rail.

  • Specs
  • Motor: 12-amp corded (1,300 watts), variable speed 1,750–4,000 RPM
  • Blade: 6-1/2 inch, 48-tooth ultra-fine finishing blade, 20 mm arbor
  • Cutting depth on track: 2-1/8 inches at 90 degrees, 1-5/8 inches at 45 degrees
  • Bevel range: up to 47 degrees
  • Guide rail: not included; uses DeWalt tracks, which accept the saw from either side
  • Weight: 11.5 lb
  • Tier: mid-range

DeWalt’s design uses a parallel-link plunge mechanism, so the blade moves straight down rather than pivoting, and a riving knife with anti-kickback control — a combination few rivals offer. The dual-sided track means the saw can run in either direction without turning the rail around, which speeds up work on long sheets. Buyers set on the DeWalt track ecosystem get a durable corded saw here, but the rail purchase should be counted as part of the real cost from the start.

Festool TSC 55 KEBI-F-Plus Cordless Plunge-Cut Track Saw

Festool TSC 55 KEBI-F-Plus Cordless Plunge-Cut Track Saw (577677)

Festool TSC 55 KEBI-F-Plus Cordless Plunge-Cut Track Saw (577677)

Check price on Amazon

This listing (Festool 577677) is the KEBI-F-Plus configuration: the TSC 55 cordless saw, two 5.0 Ah 18-volt battery packs, a rapid charger, a fine-tooth blade, a splinter guard, a chip collection bag, and a Systainer SYS3 case. The guide rail is not included in this configuration — versions with “FS” in the name add the 55-inch rail.

  • Specs
  • Motor: brushless EC-TEC, powered by two 18 V batteries (36 V total)
  • Blade: 160 mm (about 6-1/4 inch) fine-tooth blade included
  • Cutting depth: 55 mm at 90 degrees, 43 mm at 45 degrees
  • Bevel range: −1 to 47 degrees
  • Speed range: 2,650–3,800 RPM on one battery, up to 5,200 RPM on two
  • Guide rail: not included in this configuration
  • Tier: premium

The TSC 55’s signature feature is its kickback stop, which Festool says halts the blade almost immediately if the saw lifts or binds, and the saw can run on one battery at reduced speed or two for full power. Festool’s rail system, splinter guards on both sides of the cut, and dust extraction are the benchmark other brands are measured against. This is the pick for finish carpenters who cut expensive sheet goods daily and want the most refined system — provided the separate rail purchase fits the plan.

Milwaukee M18 FUEL 2831-20 Plunge Track Saw

This listing is the bare tool: the 2831-20 saw with its blade and a dust bag. No battery, charger, case, or guide rail is included, so it only makes sense priced as an add-on for someone already holding M18 batteries — Milwaukee’s 2831-21 kit is the version with a battery and charger.

  • Specs
  • Motor: POWERSTATE brushless, M18 18 V platform (battery not included)
  • Blade: 6-1/2 inch, 20 mm arbor
  • No-load speed: variable, 2,500–5,600 RPM
  • Cutting depth: 2-1/4 inches at 90 degrees off track, 2-1/8 inches on track
  • Bevel range: −1 to 48 degrees
  • Guide rail: not included; Milwaukee rails come in 31, 55, and 106 inches
  • Weight: 9.8 lb (bare tool)
  • Tier: mid-range

Milwaukee publishes a dust collection efficiency rating of over 90 percent when the saw is connected to a vacuum, and the saw carries a proper riving knife, an adjustable cam for dialing out play between the saw base and the rail, and a micro-adjust depth knob. The depth indicator has separate marks for on-track and off-track cutting, which removes a common source of shallow cuts. For M18 owners, this is the cordless track saw that slots into an existing kit without a second battery platform.

WEN CT1065 Plunge Cut Sidewinder Track Saw

The CT1065 is sold as the saw only, with a 6-1/2-inch 24-tooth carbide-tipped blade in the box. WEN’s 100-inch track (CT9502) and track clamps are separate purchases, and the saw is a track saw in name and function only once that rail is added.

  • Specs
  • Motor: 10-amp corded, up to 5,500 RPM
  • Blade: 6-1/2 inch (165 mm), 24-tooth carbide-tipped, 20 mm arbor
  • Cutting depth: 2-1/3 inches at 90 degrees, 1-5/8 inches at 45 degrees
  • Bevel range: 0 to 45 degrees (left bevel)
  • Guide rail: not included; compatible with WEN CT9502 track and CT992F clamps
  • Warranty: 2-year, per WEN
  • Tier: budget

The CT1065 covers the plunge saw fundamentals: a depth gauge adjustable from 0 to 2-1/3 inches, a three-position blade setting (scoring cut, full plunge, and blade change), anti-kickback base cams, and a back-mounted dust port. Its on-paper cutting depth is actually the deepest in this group at 90 degrees. What the budget tier gives up is refinement — a coarser stock blade, simpler controls, and a smaller accessory ecosystem. As a first track saw for occasional sheet breakdown and door trimming, it delivers the core capability at the lowest entry point here.

How to choose

Start with the rail, not the saw. A track saw without a rail is just a plunge saw, so compare complete setups: the Makita kit includes a 55-inch rail, while the DeWalt, Festool, Milwaukee, and WEN listings here all need a rail bought separately. A 55-inch rail crosscuts a 4×8 sheet across its width; ripping the full length calls for a 100-inch-plus rail or two joined sections. Rails are also brand ecosystems — most saws run best on their own maker’s track, so the rail decision effectively locks in the saw brand.

Corded versus cordless is the second call. Corded saws (Makita, DeWalt, WEN) run indefinitely and skip battery costs, which suits a fixed workshop. Cordless models (Festool, Milwaukee) shine on site and remove the risk of a cord catching on the rail mid-cut, but the bare-tool Milwaukee only pencils out if M18 batteries are already on the shelf.

Then check the numbers that govern your material: cutting depth at 90 degrees (all five saws here handle standard sheet goods and most doors), bevel range if you cut miters or undercut joints, and blade arbor size before assuming blades swap between brands — Festool’s 160 mm blade and the 6-1/2-inch, 20 mm arbor blades used by the others are not interchangeable. Finally, look at dust collection: every saw here has a vacuum port, and connecting one keeps the cut line visible and the rail’s splinter guard effective.

Who should skip

Skip the track saw category if a table saw with a crosscut sled already handles your sheet goods and you rarely cut full-size panels — the track saw would duplicate capability. Framers and deck builders who cut mostly dimensional lumber freehand will find a standard circular saw faster. And if the plan is to buy a bare-tool cordless saw without owning its battery platform, the honest comparison is against a complete corded kit, not the bare tool’s shelf tag.

FAQ

Can a track saw replace a table saw?
For breaking down sheet goods, trimming doors, and making straight finish cuts, yes — that is exactly the work these saws are built for. A table saw still wins for repetitive narrow rips, dadoes, and joinery cuts, so most shops keep both.

Do I need clamps for the guide rail?
Not always. Rails have anti-slip strips on the underside, and many cuts are made with the rail simply laid on the sheet. Clamps add security on narrow offcuts, vertical surfaces, and bevel cuts; WEN, Makita, and Milwaukee all sell clamps matched to their rails.

Are guide rails interchangeable between brands?
Only partly. Several saws share a similar rail profile and can physically ride on other makers’ tracks, but fit, splinter guard alignment, and accessory support vary. Milwaukee, for example, lists only its own rails as compatible. The safe approach is to buy the rail from the same maker as the saw.

Which blade should I use for plywood and melamine?
A high-tooth-count fine-finish blade — the 48-tooth blades bundled with the Makita and DeWalt are the pattern to follow. Coarser blades like the WEN’s stock 24-tooth cut faster in framing lumber but leave rougher edges in veneered sheet goods, so a finer blade is a worthwhile early upgrade.

Final verdict

The Makita SP6000J1 is the default recommendation: a complete kit with the rail included, strong published specs, and no battery platform to buy into. The DeWalt DWS520K is the corded alternative for buyers who value its riving knife and dual-sided track, as long as the separate rail is budgeted. Festool’s TSC 55 KEBI-F-Plus is the premium cordless system pick, Milwaukee’s 2831-20 is the natural choice for M18 owners, and the WEN CT1065 opens the category to budget buyers willing to add a rail and a finer blade over time.

Makita SP6000J1 Plunge Circular Saw Kit with 55-Inch Guide Rail

Makita SP6000J1 Plunge Circular Saw Kit with 55-Inch Guide Rail

Check price on Amazon

DEWALT DWS520K 6-1/2-Inch TrackSaw Kit

DEWALT DWS520K 6-1/2-Inch TrackSaw Kit

Check price on Amazon

Milwaukee M18 FUEL 2831-20 Plunge Track Saw (Tool Only)

Milwaukee M18 FUEL 2831-20 Plunge Track Saw (Tool Only)

Check price on Amazon

WEN CT1065 10-Amp Plunge Cut Sidewinder Track Saw

WEN CT1065 10-Amp Plunge Cut Sidewinder Track Saw

Check price on Amazon

T
Table Saw Blog Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Track Saws for Sheet Goods: 5 Plunge-Cut…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.