Updated Nov 20, 2026· 9 min read

Key takeaways

  • Compare the best lumber storage racks for workshops, with level counts, arm lengths and maker-stated load ratings for wall-mounted wood storage.
⭐ Key Takeaways
Quick answer: Our top pick is Bora Portamate PBR-001 6-Level Lumber Storage Rack, with Riciakik Lumber Storage Rack, 6-Level, 4 Pack as a strong alternative.

Boards stored on the floor or leaned against a wall take up working space, collect damage, and can bow or twist over time. A lumber storage rack solves that by holding stock flat on level arms, sorted by species or size, and off the concrete. Most workshop systems are wall-mounted pairs of steel uprights with cantilever arms at several heights, and the five racks below cover the main approaches: tall multi-level systems, compact four-level racks, and multi-pack bracket sets.

The differences that matter are published ones: how many levels you get, how long the arms are, and the load rating the maker states for each level. Every rack here is described from its listing specifications, so you can match the system to the weight and length of stock you actually keep.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most workshops, the Bora Portamate PBR-001 is the safest starting point: six levels, a maker-stated 110 pounds per level, and uprights you can space to suit your longest boards. The Riciakik 4-pack carries the highest stated rating here, the Ultrawall and mapleway multi-packs spread storage across more wall, and the Bora PBR-004 suits smaller stockpiles.

Bora Portamate PBR-001 6-Level Lumber Storage Rack

Bora Portamate PBR-001 6-Level Lumber Storage Rack

Bora Portamate PBR-001 6-Level Lumber Storage Rack

Check price on Amazon

The PBR-001 is the long-running benchmark in this category. It uses two steel uprights with six pairs of support arms, giving six levels of horizontal storage for boards, molding, pipe, and other long stock. Bora rates each level at 110 pounds, for a stated total of 660 pounds. The uprights are not a fixed width: Bora recommends spacing them 4 to 6 feet apart, so the same kit supports short offcuts in a small shop or longer boards when spread wider, up to about 72 inches overall.

The arms and uprights are 1-inch steel tubing with a powder-coated finish, and Bora lists the rack for indoor and outdoor use, which suits sheds and fences as well as framed workshop walls. Because the levels are formed by separate bars, you can leave wider vertical gaps where thick stock needs the room. This mid-range system is the one to pick when you want a single proven rack rather than a wall of separate brackets.

Specs

  • Levels: 6
  • Load rating: 110 lb per level, 660 lb total (maker-stated)
  • Construction: 1-inch powder-coated steel tubing
  • Overall size: 41 in high, up to 72 in wide, 12.5 in shelf depth
  • Mounting: wall mount, uprights spaced 4 to 6 ft apart (recommended)
  • Use: indoor and outdoor, per maker
  • Color: orange and gray

Riciakik Lumber Storage Rack, 6-Level, 4 Pack

Riciakik Lumber Storage Rack, 6-Level, 4 Pack

Riciakik Lumber Storage Rack, 6-Level, 4 Pack

Check price on Amazon

The Riciakik system takes the opposite approach to the Bora: instead of one pair of tall uprights, the box holds four separate wall-mounted racks, each with six levels. Riciakik states a capacity of 220 pounds per shelf, adding up to a stated 1,320 pounds across the 4-pack. That makes it the highest-rated option here on published figures, suited to shops storing dense hardwood or dedicating separate racks to different materials.

The arms are 13.12 inches long, slightly deeper than the Bora arms, and the maker describes a triangular one-piece welded design intended to keep the arms rigid under load. The kit includes drywall anchors and a high-strength screw kit, and Riciakik lists the racks for concrete, wood, and brick walls. With four independent racks, spacing is up to you: run them in a line for long boards, or split them between two walls. It sits in the mid-range tier, with capacity the main reason to choose it.

Specs

  • Levels: 6 per rack, 4 racks included
  • Load rating: 220 lb per shelf, 1,320 lb total for the 4-pack (maker-stated)
  • Arm length: 13.12 in
  • Construction: welded steel, triangular one-piece arm design
  • Mounting: wall mount, anchors and screw kit included
  • Use: indoor and outdoor, per maker
  • Color: orange

Bora PBR-004 4-Level Lumber Storage Rack (PBR-0410)

Bora PBR-004 4-Level Lumber Storage Rack (PBR-0410)

Bora PBR-004 4-Level Lumber Storage Rack (PBR-0410)

Check price on Amazon

The PBR-004 is the smaller sibling of the PBR-001, sold on Amazon under the PBR-0410 listing name. It keeps the same design, two wall-mounted uprights with arms of 1-inch powder-coated steel tubing, but drops to four levels. Bora rates it at the same 110 pounds per shelf, for a stated total of 440 pounds. For a modest stockpile of project boards rather than a full lumber inventory, four levels are often enough, and the shorter upright fits more easily above a bench.

Overall width is again flexible up to about 72 inches depending on upright spacing, shelf depth is 12.5 inches, and the upright stands about 24.5 inches tall. Bora lists it for indoor and outdoor use. It is a budget to mid-range pick, and the natural choice when the six-level PBR-001 is more rack than your stockpile needs.

Specs

  • Levels: 4
  • Load rating: 110 lb per level, 440 lb total (maker-stated)
  • Construction: 1-inch powder-coated steel tubing
  • Overall size: about 24.5 in high, up to 72 in wide, 12.5 in shelf depth
  • Mounting: wall mount, adjustable upright spacing
  • Use: indoor and outdoor, per maker
  • Color: orange and gray

Ultrawall Wall Mount Wood Organizer, 3-Level, 4 Pack

Ultrawall Wall Mount Wood Organizer, 3-Level, 4 Pack

Ultrawall Wall Mount Wood Organizer, 3-Level, 4 Pack

Check price on Amazon

Ultrawall sells its lumber rack as a 4-pack of compact three-level wall brackets. Each bracket is a single welded unit rather than a pair of uprights, so a pack can be spread along a long wall or divided between the workshop and a shed. Ultrawall states a load figure of up to 330 pounds per shelf, the highest per-level number in this group, though the listing wording is less precise than the Bora ratings, so treat it as a maker claim and mount into studs or masonry as directed.

Each bracket measures roughly 16 inches deep and 17.3 inches tall, a deeper arm than the Bora systems, suiting wider boards and sheet offcuts. The steel has a scratch-resistant finish, standard mounting hardware is included, and the maker lists the racks for indoor and outdoor use. As a budget-tier way to cover a lot of wall with short, independent racks, it is a practical pick for mixed storage of lumber, pipe, and long tools.

Specs

  • Levels: 3 per bracket, 4 brackets included
  • Load rating: up to 330 lb per shelf (maker-stated)
  • Bracket size: about 15.9 in deep, 17.3 in high
  • Construction: steel with scratch-resistant finish
  • Mounting: wall mount, standard hardware included
  • Use: indoor and outdoor, per maker
  • Color: orange (black also sold)

mapleway Lumber Storage Rack, 4-Level, 4 Pack

Check price on Amazon

The mapleway set is another multi-pack of independent wall brackets, with four levels per bracket and four brackets in the box. The maker gives the rack a total length of 26 inches and a width of 16.7 inches, with each layer spaced about 6.3 inches apart. That tighter spacing suits thinner stock: dimension lumber, trim, and shorts that would waste the taller gaps of a six-level system.

The brackets are metal, wall-mounted, and listed for garages, workshops, and basements, indoors or outdoors. One gap to note: the listing’s specification table does not publish a per-level load rating, so there is no maker figure to compare against the rated systems above. For heavy hardwood, a rated rack is the safer buy; for light stock and offcut organization at a budget tier, the mapleway pack covers a lot of levels for the space it takes.

Specs

  • Levels: 4 per bracket, 4 brackets included
  • Load rating: not published in the listing specification table
  • Dimensions: 26 in total length, 16.7 in wide, about 6.3 in between levels
  • Construction: metal
  • Mounting: wall mount
  • Use: indoor and outdoor, per maker

How to choose

Start with the load math. Add up the rough weight of the stock you plan to keep on one level, and compare it with the maker’s stated per-level rating, not the headline total. A total figure only applies when the load is spread evenly across every level, so the per-level number decides whether a rack fits your heaviest boards. Treat these figures as maker-stated ratings that assume correct mounting; they are not a guarantee for any particular wall.

Next, match the format to your wall. Tall upright systems like the Bora racks give many levels in one footprint and let you set the width by spacing the uprights, which helps with long boards needing support at two separated points. Multi-pack brackets from Riciakik, Ultrawall, and mapleway trade that footprint for flexibility: more, shorter racks that can follow stud spacing or split between walls. Check arm length against your widest stock, too; arms here run from about 12.5 to 16 inches.

Mounting matters as much as the rack. Every system here depends on fixings into studs, joists, or masonry, and several makers explicitly warn against exceeding the stated limit. If your walls cannot take that kind of fixing, or you rent the space, a freestanding cantilever rack is the alternative format: it stands on its own base and needs floor space instead of wall space. Finally, count your levels honestly. Six levels suit sorted inventories of several species and thicknesses; three or four levels are plenty for a working stockpile that turns over quickly.

Who should skip

Skip a wall-mounted rack if your walls are metal-stud, crumbling masonry, or otherwise unable to hold loaded fixings; the ratings above all assume solid anchoring. Skip these systems, too, if most of your storage is full sheet goods: cantilever arms hold boards and offcuts well, but full plywood sheets are better on a dedicated sheet rack or vertical bin. If you only buy lumber per project and keep almost nothing on hand, even a small rack wastes wall space. And if your stock includes beams beyond the stated per-level ratings, look at industrial cantilever racking instead.

FAQ

How far apart should the uprights be on a two-post lumber rack?

Follow the maker’s guidance for your model. Bora, for example, recommends spacing the PBR-001 uprights 4 to 6 feet apart. Wider spacing suits longer boards, while closer spacing gives more support points under shorter, heavier stock.

Can a lumber storage rack be used outdoors?

Several racks here, including both Bora models, the Riciakik, the Ultrawall, and the mapleway, are listed by their makers for indoor and outdoor use, with powder-coated or scratch-resistant finishes. Outdoor mounting still needs solid fixings into a wall or fence rated for the load.

What is the difference between per-level and total load ratings?

The per-level rating is the most one shelf level is stated to hold; the total is that figure multiplied across all levels, assuming even loading. Plan around the per-level figure, since real stockpiles rarely load every level equally.

Do these racks hold plywood sheets?

They hold sheet offcuts and partial sheets, and deeper arms around 16 inches give more support. Full 4 by 8 sheets are awkward and heavy for cantilever wall arms, so a vertical sheet-goods bin or dedicated panel rack is usually the better format.

Final verdict

The Bora Portamate PBR-001 remains the default recommendation: six levels, clear published ratings, and flexible upright spacing cover most workshop stockpiles. Choose the Riciakik 4-pack when stated capacity is the priority, the Bora PBR-004 when four levels are enough, and the Ultrawall or mapleway multi-packs when you would rather spread several smaller racks along the wall. Whichever format you pick, anchor it into solid structure and load it within the maker’s stated per-level rating.

T
Table Saw Blog Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Lumber Storage Racks for Workshop Walls in…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.