Key takeaways
- Compare planer blades by length, width, steel type and planer fit, from 12-1/2 inch two-knife sets to 15 inch three-knife sets for benchtop planers.
A benchtop thickness planer is only as good as the knives in its cutterhead. Once the edges dull or pick up a nick from a hidden staple, the machine starts leaving ridges, tearing grain and forcing you to sand far more than you should. A fresh set of planer blades restores the finish, but only if the length, width, thickness and mounting pattern match your planer exactly, because planer knives are model-specific parts rather than universal consumables.
This guide compares five replacement blade sets covering the most common benchtop planer families, from the DeWalt DW735 pattern to the shared 12-1/2 inch, Ridgid, multi-brand 13 inch and 15 inch Delta patterns. Each set is described from its published specifications, so you can match dimensions and compatibility before ordering.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
Start by matching your planer’s knife pattern, not just its cutting width. DeWalt DW735 owners should look at the JTEX 13 inch set, which copies the DW7352 dimensions in double-sided high-speed steel. Owners of 12-1/2 inch two-knife planers from WEN, Craftsman, Delta or Porter Cable fit the POWERTEC 12803. Ridgid R4330 owners need the POWERTEC 12828, Wen 6552 owners the Dirtech set, and 15 inch Delta owners the POWERTEC 128050.
JTEX Planer Blades for DeWalt DW735 and DW735X, 13-Inch, Set of 3
The JTEX set is a direct dimensional copy of the DeWalt DW7352 knife fitted to the DW735 and DW735X, the most widely owned 13 inch benchtop planers. Each knife measures 13 inches long, 7/8 inch wide and 1/16 inch thick, and the set includes three knives to refresh the full three-knife cutterhead in one change. The blades are high-speed steel with two cutting edges, so when the first edge dulls or nicks, each knife can be flipped over to expose the second edge before the set needs replacing.
Because the DW735 uses disposable, index-style knives that locate on pins in the cutterhead, fit depends on the hole pattern as much as the outline dimensions, and this set is sold specifically against the DW7352 part number. JTEX lists the manufacturer part number as JTEX DW7352 and the material simply as HSS. For DW735 owners who want a budget-tier alternative to the factory knives, this is the straightforward pick; just confirm your machine is not the smaller DW734, which uses a different 12-1/2 inch knife.
Specs:
– Blade length: 13 inches
– Blade dimensions: 13 x 7/8 x 1/16 inches
– Material: High-speed steel (HSS)
– Edges: Double sided, reversible
– Set size: 3 knives
– Fits: DeWalt DW735 and DW735X
– Replaces: DeWalt DW7352
– Manufacturer part number: JTEX DW7352
Dirtech 13-Inch HSS Planer Blades, Set of 3
The Dirtech set covers the other big family of 13 inch benchtop planers: machines that take a narrower 15/32 inch wide knife rather than the DeWalt 7/8 inch pattern. Each blade measures 13 inches long, 15/32 inch wide and 1/16 inch thick, and Dirtech makes them from M2 high-speed steel with a cutting edge on both sides. The set of three ships in a plastic storage case, which matters because loose planer knives are easy to nick in a drawer.
The published fit list is long: Wen 6552, 6552T and PL1303, Delta 22-549, 22-555 and 22-580, Ryobi AP1300, Grizzly G0689, Metabo DH330, Craftsman 21743, the POWERTEC PL1300 and the Steel City 40100 and 40936. That breadth makes this set a practical mid-range choice for owners of older Delta and Ryobi machines whose original knives are getting harder to source.
Specs:
– Blade length: 13 inches
– Blade dimensions: 13 x 15/32 x 1/16 inches
– Material: M2 high-speed steel (HSS)
– Edges: Double sided, reversible
– Set size: 3 knives, plastic case included
– Fits: Wen 6552, 6552T, PL1303; Delta 22-549, 22-555, 22-580; Ryobi AP1300; Grizzly G0689; Metabo DH330; Craftsman 21743; Steel City 40100, 40936
POWERTEC 12803 Planer Blades, 12-1/2 Inch, Set of 2
A large group of 12-1/2 inch benchtop planers share one knife pattern and a two-knife cutterhead, and the POWERTEC 12803 is the replacement set built for them. The two high-speed steel knives are 12-1/2 inches long, and POWERTEC lists compatibility with the Craftsman CMEW320 and 21758, the WEN PL1252 and 6550, the Delta 22-560, 22-565, TP305 and TP400LS, the Grizzly G0663, the Porter Cable PC305TP and POWERTEC’s own PL1252. If your planer’s manual calls for a 12-1/2 inch two-knife set, this is very likely the pattern it uses.
POWERTEC positions its knives as meeting or exceeding the original equipment specification, and the two-piece set matches how these machines are loaded: both knives are changed together so the cutterhead stays balanced. This is a budget-tier staple for the most common entry-level planers. Check your manual for knife length and knife count before ordering, since the visually similar DW734 takes a three-knife set instead.
Specs:
– Blade length: 12-1/2 inches
– Material: High-speed steel (HSS)
– Set size: 2 knives
– Model number: 12803
– Fits: Craftsman CMEW320, 21758; WEN PL1252, 6550; Delta 22-560, 22-565, TP305, TP400LS; Grizzly G0663; Porter Cable PC305TP; POWERTEC PL1252
POWERTEC 12828 Planer Blades for Ridgid R4330, 13 Inch, Set of 3
Ridgid’s R4330 and the earlier TP1300LS use their own 13 inch knife, and the POWERTEC 12828 is the set made to the AC20502 replacement specification. The three knives measure 13-3/8 inches long and 15/32 inch wide, a slightly longer blank than the standard 13 inch patterns, which is exactly why Ridgid owners cannot substitute a DeWalt or Wen set even though the cutting width sounds the same. The knives are high-speed steel and load into the R4330’s three-knife cutterhead as a matched set of three.
This is the set to buy if your planer is a Ridgid and the manual lists AC20502 as the knife part number. As with every pattern here, the check is the part number in your manual rather than the headline width: the R4330’s knives are not interchangeable with the other 13 inch sets in this guide.
Specs:
– Blade length: 13-3/8 inches
– Blade width: 15/32 inch
– Material: High-speed steel (HSS)
– Set size: 3 knives
– Model number: 12828
– Fits: Ridgid R4330 and TP1300LS
– Replaces: Ridgid AC20502
POWERTEC 128050 Planer Blades, 15 Inch, Set of 3
The largest set in this guide serves the 15 inch planers that bridge the benchtop and stationary worlds. The POWERTEC 128050 includes three high-speed steel knives sized for the Delta DC-380 and the Delta 22-677, 22-680, 22-780X, 22-785X, 22-790X and 22-795X models, and it also fits the Grizzly G1021 and G0453. These machines take a longer knife than any benchtop model, so owners have fewer aftermarket sources.
A 15 inch planer usually runs wider, heavier stock, so knife condition shows up quickly as washboarding on wide panels when edges wear unevenly. Changing all three knives together, as this set is packaged, keeps the cutterhead balanced and the cut uniform across the full width. If your planer is one of the Delta or Grizzly models listed, match the manual’s knife part number against the 22-677 specification this set is built to.
Specs:
– Blade length: 15 inches
– Material: High-speed steel (HSS)
– Set size: 3 knives
– Model number: 128050
– Fits: Delta DC-380, 22-677, 22-680, 22-780X, 22-785X, 22-790X, 22-795X; Grizzly G1021, G0453
– Replaces: Delta 22-677 knife specification
How to choose
Start with your planer’s manual, not with the cutting width printed on the machine. The manual lists the replacement knife part number and the knife dimensions, and those two details decide everything. Two planers can both be sold as 13 inch models and still use knives of different widths and hole patterns, as the DeWalt, Ridgid and Wen patterns in this guide show. If the manual is lost, remove one knife and measure its length, width and thickness, then compare all three numbers against the published dimensions of a set before ordering.
Next, count the knives in the cutterhead. Two-knife and three-knife machines need different set sizes, and a set should always be changed complete so the head stays balanced and every edge starts at the same wear point. Then consider the steel: every set here is high-speed steel, the standard for disposable benchtop knives, and the Dirtech set specifies the M2 grade. Finally, check whether the knives are double sided, since a reversible set covers two change cycles before it is spent.
Who should skip
Skip this entire category if your planer uses a helical or spiral cutterhead with small square inserts, because those heads take individual carbide inserts rather than full-length knives, and none of these sets will fit. Owners of handheld electric planers should also skip: the 3-1/4 inch knives for hand planers are a completely different part family. If your planer is a DeWalt DW734, note that none of the sets above are its pattern; it uses a 12-1/2 inch three-knife set, so use the DW7342 specification from your manual instead. If your machine uses resharpenable solid knives rather than disposable indexed ones, a sharpening service may serve you better than a replacement set.
FAQ
How do I know which planer blades fit my planer?
Match three things from your manual: the replacement part number, the knife dimensions and the number of knives in the cutterhead. Cutting width alone is not enough, because several 13 inch planers use different knife widths and mounting patterns. Measuring a removed knife and comparing all three dimensions with the set’s published dimensions is the reliable check.
Can planer blades be sharpened instead of replaced?
The disposable, double-sided knives used by most benchtop planers are not designed to be resharpened; when both edges are dull or nicked, the set is replaced. Their thin profile and indexed mounting leave no allowance for grinding. Solid knives in larger stationary planers are a different design and can usually be honed or reground by a sharpening service.
How often should planer blades be changed?
There is no fixed hour count, because wear depends on the species, volume and cleanliness of the stock. The practical signs are ridges along the board from a nicked edge, increased tear-out, a louder cut and boards that need noticeably more sanding. With double-sided knives, flip to the fresh edge first; replace the set when the second edge shows the same symptoms.
Are aftermarket planer blades the same size as the originals?
Reputable aftermarket sets are made to the original part number’s dimensions, such as the DW7352, AC20502 and 22-677 specifications used in this guide. Still verify the published dimensions against your manual before ordering, because a fraction of an inch in width changes whether the knife seats correctly.
Final verdict
The right planer blade set is the one that matches your planer’s knife pattern exactly, and this guide is organized by pattern for that reason. DeWalt DW735 owners are best served by the JTEX set for its factory DW7352 dimensions, while the Dirtech set covers the broad Wen, Delta, Ryobi, Grizzly and Metabo 13 inch family. The POWERTEC 12803 remains the default for the shared 12-1/2 inch two-knife machines, the 12828 is the Ridgid R4330 answer, and the 128050 keeps 15 inch Delta and Grizzly planers in fresh knives. Confirm the part number and dimensions in your manual, change the full set at once, and your planer will cut like it did when the knives were new.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!